[hipl-commit] [trunk] Rev 3599: adding config file for pretty printing

  • From: Rene Hummen <rene.hummen@xxxxxxxxxxxxxxxxx>
  • To: hipl-commit@xxxxxxxxxxxxx
  • Date: Thu, 11 Feb 2010 13:09:16 +0200

Committer: Rene Hummen <rene.hummen@xxxxxxxxxxxxxxxxx>
Date: Thu Feb 11 12:08:09 2010 +0100
Revision: 3599
Revision-id: rene.hummen@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Branch nick: trunk

Log:
  adding config file for pretty printing
  
  was called with:
  uncrustify -c ../dot_uncrustify.cfg --replace --no-backup #FILE#
  
  Needs at least version 0.54

Modified:
  A  dot_uncrustify.cfg

=== added file 'dot_uncrustify.cfg'
--- dot_uncrustify.cfg  1970-01-01 00:00:00 +0000
+++ dot_uncrustify.cfg  2010-02-11 11:08:09 +0000
@@ -0,0 +1,1273 @@
+# Uncrustify 0.54
+
+#
+# General options
+#
+
+# The type of line endings
+newlines                                 = lf       # auto/lf/crlf/cr
+
+# The original size of tabs in the input
+input_tab_size                           = 8        # number
+
+# The size of tabs in the output (only used if align_with_tabs=true)
+output_tab_size                          = 4        # number
+
+# The ASCII value of the string escape char, usually 92 (\) or 94 (^). (Pawn)
+string_escape_char                       = 92       # number
+
+# Alternate string escape char for Pawn. Only works right before the quote 
char.
+string_escape_char2                      = 0        # number
+
+#
+# Indenting
+#
+
+# The number of columns to indent per level.
+# Usually 2, 3, 4, or 8.
+indent_columns                           = 4        # number
+
+# How to use tabs when indenting code
+# 0=spaces only
+# 1=indent with tabs, align with spaces
+# 2=indent and align with tabs
+indent_with_tabs                         = 0        # number
+
+# Whether to indent strings broken by '\' so that they line up
+indent_align_string                      = true     # false/true
+
+# The number of spaces to indent multi-line XML strings.
+# Requires indent_align_string=true
+indent_xml_string                        = 0        # number
+
+# Spaces to indent '{' from level
+indent_brace                             = 0        # number
+
+# Whether braces are indented to the body level
+indent_braces                            = false    # false/true
+
+# Disabled indenting function braces if indent_braces is true
+indent_braces_no_func                    = false    # false/true
+
+# Indent based on the size of the brace parent, i.e. 'if' => 3 spaces, 'for' 
=> 4 spaces, etc.
+indent_brace_parent                      = false    # false/true
+
+# Whether the 'namespace' body is indented
+indent_namespace                         = false    # false/true
+
+# The number of spaces to indent a namespace block
+indent_namespace_level                   = 0        # number
+
+# If the body of the namespace is longer than this number, it won't be 
indented.
+# Requires indent_namespace=true. Default=0 (no limit)
+indent_namespace_limit                   = 0        # number
+
+# Whether the 'extern "C"' body is indented
+indent_extern                            = false    # false/true
+
+# Whether the 'class' body is indented
+indent_class                             = false    # false/true
+
+# Whether to indent the stuff after a leading class colon
+indent_class_colon                       = false    # false/true
+
+# False=treat 'else\nif' as 'else if' for indenting purposes
+# True=indent the 'if' one level
+indent_else_if                           = false    # false/true
+
+# Amount to indent variable declarations after a open brace. neg=relative, 
pos=absolute
+indent_var_def_blk                       = 0        # number
+
+# True:  indent continued function call parameters one indent level
+# False: align parameters under the open paren
+indent_func_call_param                   = false    # false/true
+
+# Same as indent_func_call_param, but for function defs
+indent_func_def_param                    = false    # false/true
+
+# Same as indent_func_call_param, but for function protos
+indent_func_proto_param                  = false    # false/true
+
+# Same as indent_func_call_param, but for class declarations
+indent_func_class_param                  = false    # false/true
+
+# Same as indent_func_call_param, but for class variable constructors
+indent_func_ctor_var_param               = false    # false/true
+
+# Same as indent_func_call_param, but for templates
+indent_template_param                    = false    # false/true
+
+# Double the indent for indent_func_xxx_param options
+indent_func_param_double                 = false    # false/true
+
+# Indentation column for standalone 'const' function decl/proto qualifier
+indent_func_const                        = 0        # number
+
+# Indentation column for standalone 'throw' function decl/proto qualifier
+indent_func_throw                        = 0        # number
+
+# The number of spaces to indent a continued '->' or '.'
+# Usually set to 0, 1, or indent_columns.
+indent_member                            = 0        # number
+
+# Spaces to indent single line ('//') comments on lines before code
+indent_sing_line_comments                = 0        # number
+
+# If set, will indent trailing single line ('//') comments relative
+# to the code instead of trying to keep the same absolute column
+indent_relative_single_line_comments     = false    # false/true
+
+# Spaces to indent 'case' from 'switch'
+# Usually 0 or indent_columns.
+indent_switch_case                       = 0        # number
+
+# Spaces to shift the 'case' line, without affecting any other lines
+# Usually 0.
+indent_case_shift                        = 0        # number
+
+# Spaces to indent '{' from 'case'.
+# By default, the brace will appear under the 'c' in case.
+# Usually set to 0 or indent_columns.
+indent_case_brace                        = 0        # number
+
+# Whether to indent comments found in first column
+indent_col1_comment                      = false    # false/true
+
+# How to indent goto labels
+#  >0 : absolute column where 1 is the leftmost column
+#  <=0 : subtract from brace indent
+indent_label                             = 1        # number
+
+# Same as indent_label, but for access specifiers that are followed by a colon
+indent_access_spec                       = 1        # number
+
+# Indent the code after an access specifier by one level.
+# If set, this option forces 'indent_access_spec=0'
+indent_access_spec_body                  = false    # false/true
+
+# If an open paren is followed by a newline, indent the next line so that it 
lines up after the open paren (not recommended)
+indent_paren_nl                          = false    # false/true
+
+# Controls the indent of a close paren after a newline.
+# 0: Indent to body level
+# 1: Align under the open paren
+# 2: Indent to the brace level
+indent_paren_close                       = 0        # number
+
+# Controls the indent of a comma when inside a paren.If TRUE, aligns under the 
open paren
+indent_comma_paren                       = false    # false/true
+
+# Controls the indent of a BOOL operator when inside a paren.If TRUE, aligns 
under the open paren
+indent_bool_paren                        = false    # false/true
+
+# If an open square is followed by a newline, indent the next line so that it 
lines up after the open square (not recommended)
+indent_square_nl                         = false    # false/true
+
+# Don't change the relative indent of ESQL/C 'EXEC SQL' bodies
+indent_preserve_sql                      = false    # false/true
+
+# Align continued statements at the '='. Default=true
+# If FALSE or the '=' is followed by a newline, the next line is indent one 
tab.
+indent_align_assign                      = true     # false/true
+
+#
+# Spacing options
+#
+
+# Add or remove space around arithmetic operator '+', '-', '/', '*', etc
+sp_arith                                 = add      # ignore/add/remove/force
+
+# Add or remove space around assignment operator '=', '+=', etc
+sp_assign                                = add      # ignore/add/remove/force
+
+# Add or remove space before assignment operator '=', '+=', etc. Overrides 
sp_assign.
+sp_before_assign                         = ignore   # ignore/add/remove/force
+
+# Add or remove space after assignment operator '=', '+=', etc. Overrides 
sp_assign.
+sp_after_assign                          = ignore   # ignore/add/remove/force
+
+# Add or remove space around assignment '=' in enum
+sp_enum_assign                           = add      # ignore/add/remove/force
+
+# Add or remove space before assignment '=' in enum. Overrides sp_enum_assign.
+sp_enum_before_assign                    = ignore   # ignore/add/remove/force
+
+# Add or remove space after assignment '=' in enum. Overrides sp_enum_assign.
+sp_enum_after_assign                     = ignore   # ignore/add/remove/force
+
+# Add or remove space around preprocessor '##' concatenation operator. 
Default=Add
+sp_pp_concat                             = add      # ignore/add/remove/force
+
+# Add or remove space after preprocessor '#' stringify operator. Default=Add
+sp_pp_stringify                          = add      # ignore/add/remove/force
+
+# Add or remove space around boolean operators '&&' and '||'
+sp_bool                                  = add      # ignore/add/remove/force
+
+# Add or remove space around compare operator '<', '>', '==', etc
+sp_compare                               = add      # ignore/add/remove/force
+
+# Add or remove space inside '(' and ')'
+sp_inside_paren                          = remove   # ignore/add/remove/force
+
+# Add or remove space between nested parens
+sp_paren_paren                           = remove   # ignore/add/remove/force
+
+# Whether to balance spaces inside nested parens
+sp_balance_nested_parens                 = false    # false/true
+
+# Add or remove space between ')' and '{'
+sp_paren_brace                           = force    # ignore/add/remove/force
+
+# Add or remove space before pointer star '*'
+sp_before_ptr_star                       = add      # ignore/add/remove/force
+
+# Add or remove space before pointer star '*' that isn't followed by a 
variable name
+# If set to 'ignore', sp_before_ptr_star is used instead.
+sp_before_unnamed_ptr_star               = ignore   # ignore/add/remove/force
+
+# Add or remove space between pointer stars '*'
+sp_between_ptr_star                      = remove   # ignore/add/remove/force
+
+# Add or remove space after pointer star '*', if followed by a word.
+sp_after_ptr_star                        = remove   # ignore/add/remove/force
+
+# Add or remove space after a pointer star '*', if followed by a func 
proto/def.
+sp_after_ptr_star_func                   = remove   # ignore/add/remove/force
+
+# Add or remove space before a pointer star '*', if followed by a func 
proto/def.
+sp_before_ptr_star_func                  = ignore   # ignore/add/remove/force
+
+# Add or remove space before a reference sign '&'
+sp_before_byref                          = force    # ignore/add/remove/force
+
+# Add or remove space before a reference sign '&' that isn't followed by a 
variable name
+# If set to 'ignore', sp_before_byref is used instead.
+sp_before_unnamed_byref                  = add      # ignore/add/remove/force
+
+# Add or remove space after reference sign '&', if followed by a word.
+sp_after_byref                           = ignore   # ignore/add/remove/force
+
+# Add or remove space after a reference sign '&', if followed by a func 
proto/def.
+sp_after_byref_func                      = ignore   # ignore/add/remove/force
+
+# Add or remove space before a reference sign '&', if followed by a func 
proto/def.
+sp_before_byref_func                     = ignore   # ignore/add/remove/force
+
+# Add or remove space between type and word. Default=Force
+sp_after_type                            = force    # ignore/add/remove/force
+
+# Add or remove space in 'template <' vs 'template<'.
+# If set to ignore, sp_before_angle is used.
+sp_template_angle                        = ignore   # ignore/add/remove/force
+
+# Add or remove space before '<>'
+sp_before_angle                          = ignore   # ignore/add/remove/force
+
+# Add or remove space inside '<' and '>'
+sp_inside_angle                          = ignore   # ignore/add/remove/force
+
+# Add or remove space after '<>'
+sp_after_angle                           = ignore   # ignore/add/remove/force
+
+# Add or remove space between '<>' and '(' as found in 'new List<byte>();'
+sp_angle_paren                           = ignore   # ignore/add/remove/force
+
+# Add or remove space between '<>' and a word as in 'List<byte> m;'
+sp_angle_word                            = ignore   # ignore/add/remove/force
+
+# Add or remove space before '(' of 'if', 'for', 'switch', and 'while'
+sp_before_sparen                         = add      # ignore/add/remove/force
+
+# Add or remove space inside if-condition '(' and ')'
+sp_inside_sparen                         = remove   # ignore/add/remove/force
+
+# Add or remove space before if-condition ')'. Overrides sp_inside_sparen.
+sp_inside_sparen_close                   = ignore   # ignore/add/remove/force
+
+# Add or remove space after ')' of 'if', 'for', 'switch', and 'while'
+sp_after_sparen                          = ignore   # ignore/add/remove/force
+
+# Add or remove space between ')' and '{' of 'if', 'for', 'switch', and 'while'
+sp_sparen_brace                          = add      # ignore/add/remove/force
+
+# Add or remove space between 'invariant' and '(' in the D language.
+sp_invariant_paren                       = ignore   # ignore/add/remove/force
+
+# Add or remove space after the ')' in 'invariant (C) c' in the D language.
+sp_after_invariant_paren                 = ignore   # ignore/add/remove/force
+
+# Add or remove space before empty statement ';' on 'if', 'for' and 'while'
+sp_special_semi                          = add      # ignore/add/remove/force
+
+# Add or remove space before ';'. Default=Remove
+sp_before_semi                           = remove   # ignore/add/remove/force
+
+# Add or remove space before ';' in non-empty 'for' statements
+sp_before_semi_for                       = ignore   # ignore/add/remove/force
+
+# Add or remove space before a semicolon of an empty part of a for statement.
+sp_before_semi_for_empty                 = ignore   # ignore/add/remove/force
+
+# Add or remove space after ';', except when followed by a comment. Default=Add
+sp_after_semi                            = add      # ignore/add/remove/force
+
+# Add or remove space after ';' in non-empty 'for' statements. Default=Force
+sp_after_semi_for                        = force    # ignore/add/remove/force
+
+# Add or remove space after the final semicolon of an empty part of a for 
statement: for ( ; ; <here> ).
+sp_after_semi_for_empty                  = ignore   # ignore/add/remove/force
+
+# Add or remove space before '[' (except '[]')
+sp_before_square                         = remove   # ignore/add/remove/force
+
+# Add or remove space before '[]'
+sp_before_squares                        = ignore   # ignore/add/remove/force
+
+# Add or remove space inside '[' and ']'
+sp_inside_square                         = ignore   # ignore/add/remove/force
+
+# Add or remove space after ','
+sp_after_comma                           = add      # ignore/add/remove/force
+
+# Add or remove space before ','
+sp_before_comma                          = remove   # ignore/add/remove/force
+
+# Add or remove space before the variadic '...'
+sp_before_ellipsis                       = ignore   # ignore/add/remove/force
+
+# Add or remove space after class ':'
+sp_after_class_colon                     = ignore   # ignore/add/remove/force
+
+# Add or remove space before class ':'
+sp_before_class_colon                    = ignore   # ignore/add/remove/force
+
+# Add or remove space before case ':'. Default=Remove
+sp_before_case_colon                     = remove   # ignore/add/remove/force
+
+# Add or remove space between 'operator' and operator sign
+sp_after_operator                        = ignore   # ignore/add/remove/force
+
+# Add or remove space between the operator symbol and the open paren, as in 
'operator ++('
+sp_after_operator_sym                    = ignore   # ignore/add/remove/force
+
+# Add or remove space after C/D cast, i.e. 'cast(int)a' vs 'cast(int) a' or 
'(int)a' vs '(int) a'
+sp_after_cast                            = add      # ignore/add/remove/force
+
+# Add or remove spaces inside cast parens
+sp_inside_paren_cast                     = ignore   # ignore/add/remove/force
+
+# Add or remove space between the type and open paren in a C++ cast, i.e. 
'int(exp)' vs 'int (exp)'
+sp_cpp_cast_paren                        = ignore   # ignore/add/remove/force
+
+# Add or remove space between 'sizeof' and '('
+sp_sizeof_paren                          = remove   # ignore/add/remove/force
+
+# Add or remove space after the tag keyword (Pawn)
+sp_after_tag                             = ignore   # ignore/add/remove/force
+
+# Add or remove space inside enum '{' and '}'
+sp_inside_braces_enum                    = force    # ignore/add/remove/force
+
+# Add or remove space inside struct/union '{' and '}'
+sp_inside_braces_struct                  = force    # ignore/add/remove/force
+
+# Add or remove space inside '{' and '}'
+sp_inside_braces                         = ignore   # ignore/add/remove/force
+
+# Add or remove space inside '{}'
+sp_inside_braces_empty                   = ignore   # ignore/add/remove/force
+
+# Add or remove space between return type and function name
+# A minimum of 1 is forced except for pointer return types.
+sp_type_func                             = ignore   # ignore/add/remove/force
+
+# Add or remove space between function name and '(' on function declaration
+sp_func_proto_paren                      = remove   # ignore/add/remove/force
+
+# Add or remove space between function name and '(' on function definition
+sp_func_def_paren                        = remove   # ignore/add/remove/force
+
+# Add or remove space inside empty function '()'
+sp_inside_fparens                        = ignore   # ignore/add/remove/force
+
+# Add or remove space inside function '(' and ')'
+sp_inside_fparen                         = ignore   # ignore/add/remove/force
+
+# Add or remove space between ']' and '(' when part of a function call.
+sp_square_fparen                         = ignore   # ignore/add/remove/force
+
+# Add or remove space between ')' and '{' of function
+sp_fparen_brace                          = add      # ignore/add/remove/force
+
+# Add or remove space between function name and '(' on function calls
+sp_func_call_paren                       = remove   # ignore/add/remove/force
+
+# Add or remove space between the user function name and '(' on function calls
+# You need to set a keyword to be a user function, like this: 'set 
func_call_user _' in the config file.
+sp_func_call_user_paren                  = ignore   # ignore/add/remove/force
+
+# Add or remove space between a constructor/destructor and the open paren
+sp_func_class_paren                      = ignore   # ignore/add/remove/force
+
+# Add or remove space between 'return' and '('
+sp_return_paren                          = ignore   # ignore/add/remove/force
+
+# Add or remove space between '__attribute__' and '('
+sp_attribute_paren                       = ignore   # ignore/add/remove/force
+
+# Add or remove space between 'defined' and '(' in '#if defined (FOO)'
+sp_defined_paren                         = ignore   # ignore/add/remove/force
+
+# Add or remove space between 'throw' and '(' in 'throw (something)'
+sp_throw_paren                           = ignore   # ignore/add/remove/force
+
+# Add or remove space between macro and value
+sp_macro                                 = ignore   # ignore/add/remove/force
+
+# Add or remove space between macro function ')' and value
+sp_macro_func                            = ignore   # ignore/add/remove/force
+
+# Add or remove space between 'else' and '{' if on the same line
+sp_else_brace                            = force    # ignore/add/remove/force
+
+# Add or remove space between '}' and 'else' if on the same line
+sp_brace_else                            = add      # ignore/add/remove/force
+
+# Add or remove space between '}' and the name of a typedef on the same line
+sp_brace_typedef                         = add      # ignore/add/remove/force
+
+# Add or remove space between 'catch' and '{' if on the same line
+sp_catch_brace                           = ignore   # ignore/add/remove/force
+
+# Add or remove space between '}' and 'catch' if on the same line
+sp_brace_catch                           = ignore   # ignore/add/remove/force
+
+# Add or remove space between 'finally' and '{' if on the same line
+sp_finally_brace                         = ignore   # ignore/add/remove/force
+
+# Add or remove space between '}' and 'finally' if on the same line
+sp_brace_finally                         = ignore   # ignore/add/remove/force
+
+# Add or remove space between 'try' and '{' if on the same line
+sp_try_brace                             = ignore   # ignore/add/remove/force
+
+# Add or remove space between get/set and '{' if on the same line
+sp_getset_brace                          = ignore   # ignore/add/remove/force
+
+# Add or remove space before the '::' operator
+sp_before_dc                             = ignore   # ignore/add/remove/force
+
+# Add or remove space after the '::' operator
+sp_after_dc                              = ignore   # ignore/add/remove/force
+
+# Add or remove around the D named array initializer ':' operator
+sp_d_array_colon                         = ignore   # ignore/add/remove/force
+
+# Add or remove space after the '!' (not) operator. Default=Remove
+sp_not                                   = remove   # ignore/add/remove/force
+
+# Add or remove space after the '~' (invert) operator. Default=Remove
+sp_inv                                   = remove   # ignore/add/remove/force
+
+# Add or remove space after the '&' (address-of) operator. Default=Remove
+# This does not affect the spacing after a '&' that is part of a type.
+sp_addr                                  = remove   # ignore/add/remove/force
+
+# Add or remove space around the '.' or '->' operators. Default=Remove
+sp_member                                = remove   # ignore/add/remove/force
+
+# Add or remove space after the '*' (dereference) operator. Default=Remove
+# This does not affect the spacing after a '*' that is part of a type.
+sp_deref                                 = remove   # ignore/add/remove/force
+
+# Add or remove space after '+' or '-', as in 'x = -5' or 'y = +7'. 
Default=Remove
+sp_sign                                  = remove   # ignore/add/remove/force
+
+# Add or remove space before or after '++' and '--', as in '(--x)' or 'y++;'. 
Default=Remove
+sp_incdec                                = remove   # ignore/add/remove/force
+
+# Add or remove space before a backslash-newline at the end of a line. 
Default=Add
+sp_before_nl_cont                        = add      # ignore/add/remove/force
+
+# Add or remove space after the scope '+' or '-', as in '-(void) foo;' or 
'+(int) bar;'
+sp_after_oc_scope                        = ignore   # ignore/add/remove/force
+
+# Add or remove space after the colon in message specs
+# '-(int) f:(int) x;' vs '-(int) f: (int) x;'
+sp_after_oc_colon                        = ignore   # ignore/add/remove/force
+
+# Add or remove space before the colon in message specs
+# '-(int) f: (int) x;' vs '-(int) f : (int) x;'
+sp_before_oc_colon                       = ignore   # ignore/add/remove/force
+
+# Add or remove space after the colon in message specs
+# '[object setValue:1];' vs '[object setValue: 1];'
+sp_after_send_oc_colon                   = ignore   # ignore/add/remove/force
+
+# Add or remove space before the colon in message specs
+# '[object setValue:1];' vs '[object setValue :1];'
+sp_before_send_oc_colon                  = ignore   # ignore/add/remove/force
+
+# Add or remove space after the (type) in message specs
+# '-(int)f: (int) x;' vs '-(int)f: (int)x;'
+sp_after_oc_type                         = ignore   # ignore/add/remove/force
+
+# Add or remove space after the first (type) in message specs
+# '-(int) f:(int)x;' vs '-(int)f:(int)x;'
+sp_after_oc_return_type                  = ignore   # ignore/add/remove/force
+
+# Add or remove space between '@selector' and '('
+# '@selector(msgName).' vs '@selector (msgName)'
+sp_after_oc_at_sel                       = ignore   # ignore/add/remove/force
+
+# Add or remove space around the ':' in 'b ? t : f'
+sp_cond_colon                            = add      # ignore/add/remove/force
+
+# Add or remove space around the '?' in 'b ? t : f'
+sp_cond_question                         = add      # ignore/add/remove/force
+
+# Fix the spacing between 'case' and the label. Only 'ignore' and 'force' make 
sense here.
+sp_case_label                            = ignore   # ignore/add/remove/force
+
+# Control the space around the D '..' operator.
+sp_range                                 = ignore   # ignore/add/remove/force
+
+# Control the space after the opening of a C++ comment '// A' vs '//A'
+sp_cmt_cpp_start                         = ignore   # ignore/add/remove/force
+
+#
+# Code alignment (not left column spaces/tabs)
+#
+
+# Whether to keep non-indenting tabs
+align_keep_tabs                          = false    # false/true
+
+# Whether to use tabs for aligning
+align_with_tabs                          = false    # false/true
+
+# Whether to bump out to the next tab when aligning
+align_on_tabstop                         = false    # false/true
+
+# Whether to left-align numbers
+align_number_left                        = false    # false/true
+
+# Align variable definitions in prototypes and functions
+align_func_params                        = false    # false/true
+
+# Align parameters in single-line functions that have the same name.
+# The function names must already be aligned with each other.
+align_same_func_call_params              = false    # false/true
+
+# The span for aligning variable definitions (0=don't align)
+align_var_def_span                       = 0        # number
+
+# How to align the star in variable definitions.
+#  0=Part of the type     'void *   foo;'
+#  1=Part of the variable 'void     *foo;'
+#  2=Dangling             'void    *foo;'
+align_var_def_star_style                 = 0        # number
+
+# How to align the '&' in variable definitions.
+#  0=Part of the type
+#  1=Part of the variable
+#  2=Dangling
+align_var_def_amp_style                  = 0        # number
+
+# The threshold for aligning variable definitions (0=no limit)
+align_var_def_thresh                     = 0        # number
+
+# The gap for aligning variable definitions
+align_var_def_gap                        = 0        # number
+
+# Whether to align the colon in struct bit fields
+align_var_def_colon                      = false    # false/true
+
+# Whether to align any attribute after the variable name
+align_var_def_attribute                  = false    # false/true
+
+# Whether to align inline struct/enum/union variable definitions
+align_var_def_inline                     = false    # false/true
+
+# The span for aligning on '=' in assignments (0=don't align)
+align_assign_span                        = 4        # number
+
+# The threshold for aligning on '=' in assignments (0=no limit)
+align_assign_thresh                      = 0        # number
+
+# The span for aligning on '=' in enums (0=don't align)
+align_enum_equ_span                      = 4        # number
+
+# The threshold for aligning on '=' in enums (0=no limit)
+align_enum_equ_thresh                    = 0        # number
+
+# The span for aligning struct/union (0=don't align)
+align_var_struct_span                    = 4        # number
+
+# The threshold for aligning struct/union member definitions (0=no limit)
+align_var_struct_thresh                  = 0        # number
+
+# The gap for aligning struct/union member definitions
+align_var_struct_gap                     = 0        # number
+
+# The span for aligning struct initializer values (0=don't align)
+align_struct_init_span                   = 4        # number
+
+# The minimum space between the type and the synonym of a typedef
+align_typedef_gap                        = 0        # number
+
+# The span for aligning single-line typedefs (0=don't align)
+align_typedef_span                       = 0        # number
+
+# How to align typedef'd functions with other typedefs
+# 0: Don't mix them at all
+# 1: align the open paren with the types
+# 2: align the function type name with the other type names
+align_typedef_func                       = 0        # number
+
+# Controls the positioning of the '*' in typedefs. Just try it.
+# 0: Align on typedef type, ignore '*'
+# 1: The '*' is part of type name: typedef int  *pint;
+# 2: The '*' is part of the type, but dangling: typedef int *pint;
+align_typedef_star_style                 = 0        # number
+
+# Controls the positioning of the '&' in typedefs. Just try it.
+# 0: Align on typedef type, ignore '&'
+# 1: The '&' is part of type name: typedef int  &pint;
+# 2: The '&' is part of the type, but dangling: typedef int &pint;
+align_typedef_amp_style                  = 0        # number
+
+# The span for aligning comments that end lines (0=don't align)
+align_right_cmt_span                     = 0        # number
+
+# If aligning comments, mix with comments after '}' and #endif with less than 
3 spaces before the comment
+align_right_cmt_mix                      = false    # false/true
+
+# If a trailing comment is more than this number of columns away from the text 
it follows,
+# it will qualify for being aligned.
+align_right_cmt_gap                      = 0        # number
+
+# Align trailing comment at or beyond column N; 'pulls in' comments as a bonus 
side effect (0=ignore)
+align_right_cmt_at_col                   = 0        # number
+
+# The span for aligning function prototypes (0=don't align)
+align_func_proto_span                    = 0        # number
+
+# Minimum gap between the return type and the function name.
+align_func_proto_gap                     = 0        # number
+
+# Align function protos on the 'operator' keyword instead of what follows
+align_on_operator                        = false    # false/true
+
+# Whether to mix aligning prototype and variable declarations.
+# If true, align_var_def_XXX options are used instead of align_func_proto_XXX 
options.
+align_mix_var_proto                      = false    # false/true
+
+# Align single-line functions with function prototypes, uses 
align_func_proto_span
+align_single_line_func                   = false    # false/true
+
+# Aligning the open brace of single-line functions.
+# Requires align_single_line_func=true, uses align_func_proto_span
+align_single_line_brace                  = false    # false/true
+
+# Gap for align_single_line_brace.
+align_single_line_brace_gap              = 0        # number
+
+# The span for aligning ObjC msg spec (0=don't align)
+align_oc_msg_spec_span                   = 0        # number
+
+# Whether to align macros wrapped with a backslash and a newline.
+# This will not work right if the macro contains a multi-line comment.
+align_nl_cont                            = false    # false/true
+
+# The minimum space between label and value of a preprocessor define
+align_pp_define_gap                      = 0        # number
+
+# The span for aligning on '#define' bodies (0=don't align)
+align_pp_define_span                     = 0        # number
+
+# Align lines that start with '<<' with previous '<<'. Default=true
+align_left_shift                         = true     # false/true
+
+#
+# Newline adding and removing options
+#
+
+# Whether to collapse empty blocks between '{' and '}'
+nl_collapse_empty_body                   = false    # false/true
+
+# Don't split one-line braced assignments - 'foo_t f = { 1, 2 };'
+nl_assign_leave_one_liners               = false    # false/true
+
+# Don't split one-line braced statements inside a class xx { } body
+nl_class_leave_one_liners                = false    # false/true
+
+# Don't split one-line enums: 'enum foo { BAR = 15 };'
+nl_enum_leave_one_liners                 = false    # false/true
+
+# Don't split one-line get or set functions
+nl_getset_leave_one_liners               = false    # false/true
+
+# Don't split one-line function definitions - 'int foo() { return 0; }'
+nl_func_leave_one_liners                 = false    # false/true
+
+# Don't split one-line if/else statements - 'if(a) b++;'
+nl_if_leave_one_liners                   = false    # false/true
+
+# Add or remove newlines at the start of the file
+nl_start_of_file                         = remove   # ignore/add/remove/force
+
+# The number of newlines at the start of the file (only used if 
nl_start_of_file is 'add' or 'force'
+nl_start_of_file_min                     = 0        # number
+
+# Add or remove newline at the end of the file
+nl_end_of_file                           = force    # ignore/add/remove/force
+
+# The number of newlines at the end of the file (only used if nl_end_of_file 
is 'add' or 'force')
+nl_end_of_file_min                       = 1        # number
+
+# Add or remove newline between '=' and '{'
+nl_assign_brace                          = ignore   # ignore/add/remove/force
+
+# Add or remove newline between '=' and '[' (D only)
+nl_assign_square                         = ignore   # ignore/add/remove/force
+
+# Add or remove newline after '= [' (D only). Will also affect the newline 
before the ']'
+nl_after_square_assign                   = ignore   # ignore/add/remove/force
+
+# The number of newlines after a block of variable definitions
+nl_func_var_def_blk                      = 0        # number
+
+# Add or remove newline between a function call's ')' and '{', as in:
+# list_for_each(item, &list) { }
+nl_fcall_brace                           = ignore   # ignore/add/remove/force
+
+# Add or remove newline between 'enum' and '{'
+nl_enum_brace                            = remove   # ignore/add/remove/force
+
+# Add or remove newline between 'struct and '{'
+nl_struct_brace                          = remove   # ignore/add/remove/force
+
+# Add or remove newline between 'union' and '{'
+nl_union_brace                           = remove   # ignore/add/remove/force
+
+# Add or remove newline between 'if' and '{'
+nl_if_brace                              = remove   # ignore/add/remove/force
+
+# Add or remove newline between '}' and 'else'
+nl_brace_else                            = remove   # ignore/add/remove/force
+
+# Add or remove newline between 'else if' and '{'
+# If set to ignore, nl_if_brace is used instead
+nl_elseif_brace                          = ignore   # ignore/add/remove/force
+
+# Add or remove newline between 'else' and '{'
+nl_else_brace                            = remove   # ignore/add/remove/force
+
+# Add or remove newline between 'else' and 'if'
+nl_else_if                               = remove   # ignore/add/remove/force
+
+# Add or remove newline between '}' and 'finally'
+nl_brace_finally                         = ignore   # ignore/add/remove/force
+
+# Add or remove newline between 'finally' and '{'
+nl_finally_brace                         = ignore   # ignore/add/remove/force
+
+# Add or remove newline between 'try' and '{'
+nl_try_brace                             = ignore   # ignore/add/remove/force
+
+# Add or remove newline between get/set and '{'
+nl_getset_brace                          = ignore   # ignore/add/remove/force
+
+# Add or remove newline between 'for' and '{'
+nl_for_brace                             = remove   # ignore/add/remove/force
+
+# Add or remove newline between 'catch' and '{'
+nl_catch_brace                           = ignore   # ignore/add/remove/force
+
+# Add or remove newline between '}' and 'catch'
+nl_brace_catch                           = ignore   # ignore/add/remove/force
+
+# Add or remove newline between 'while' and '{'
+nl_while_brace                           = remove   # ignore/add/remove/force
+
+# Add or remove newline between two open or close braces.
+# Due to general newline/brace handling, REMOVE may not work.
+nl_brace_brace                           = ignore   # ignore/add/remove/force
+
+# Add or remove newline between 'do' and '{'
+nl_do_brace                              = remove   # ignore/add/remove/force
+
+# Add or remove newline between '}' and 'while' of 'do' statement
+nl_brace_while                           = remove   # ignore/add/remove/force
+
+# Add or remove newline between 'switch' and '{'
+nl_switch_brace                          = remove   # ignore/add/remove/force
+
+# Add a newline between ')' and '{' if the ')' is on a different line than the 
if/for/etc.
+# Overrides nl_for_brace, nl_if_brace, nl_switch_brace, nl_while_switch, and 
nl_catch_brace.
+nl_multi_line_cond                       = false    # false/true
+
+# Force a newline in a define after the macro name for multi-line defines.
+nl_multi_line_define                     = false    # false/true
+
+# Whether to put a newline before 'case' statement
+nl_before_case                           = false    # false/true
+
+# Add or remove newline between ')' and 'throw'
+nl_before_throw                          = ignore   # ignore/add/remove/force
+
+# Whether to put a newline after 'case' statement
+nl_after_case                            = false    # false/true
+
+# Newline between namespace and {
+nl_namespace_brace                       = ignore   # ignore/add/remove/force
+
+# Add or remove newline between 'template<>' and whatever follows.
+nl_template_class                        = ignore   # ignore/add/remove/force
+
+# Add or remove newline between 'class' and '{'
+nl_class_brace                           = ignore   # ignore/add/remove/force
+
+# Add or remove newline after each ',' in the constructor member initialization
+nl_class_init_args                       = ignore   # ignore/add/remove/force
+
+# Add or remove newline between return type and function name in a function 
definition
+nl_func_type_name                        = remove   # ignore/add/remove/force
+
+# Add or remove newline between return type and function name inside a class {}
+# Uses nl_func_type_name or nl_func_proto_type_name if set to ignore.
+nl_func_type_name_class                  = ignore   # ignore/add/remove/force
+
+# Add or remove newline between function scope and name in a definition
+# Controls the newline after '::' in 'void A::f() { }'
+nl_func_scope_name                       = ignore   # ignore/add/remove/force
+
+# Add or remove newline between return type and function name in a prototype
+nl_func_proto_type_name                  = remove   # ignore/add/remove/force
+
+# Add or remove newline between a function name and the opening '('
+nl_func_paren                            = remove   # ignore/add/remove/force
+
+# Add or remove newline after '(' in a function declaration
+nl_func_decl_start                       = remove   # ignore/add/remove/force
+
+# Add or remove newline after each ',' in a function declaration
+nl_func_decl_args                        = ignore   # ignore/add/remove/force
+
+# Add or remove newline before the ')' in a function declaration
+nl_func_decl_end                         = remove   # ignore/add/remove/force
+
+# Add or remove newline between '()' in a function declaration.
+nl_func_decl_empty                       = ignore   # ignore/add/remove/force
+
+# Add or remove newline between function signature and '{'
+nl_fdef_brace                            = add      # ignore/add/remove/force
+
+# Whether to put a newline after 'return' statement
+nl_after_return                          = false    # false/true
+
+# Add or remove a newline between the return keyword and return expression.
+nl_return_expr                           = ignore   # ignore/add/remove/force
+
+# Whether to put a newline after semicolons, except in 'for' statements
+nl_after_semicolon                       = true     # false/true
+
+# Whether to put a newline after brace open.
+# This also adds a newline before the matching brace close.
+nl_after_brace_open                      = false    # false/true
+
+# If nl_after_brace_open and nl_after_brace_open_cmt are true, a newline is
+# placed between the open brace and a trailing single-line comment.
+nl_after_brace_open_cmt                  = false    # false/true
+
+# Whether to put a newline after a virtual brace open.
+# These occur in un-braced if/while/do/for statement bodies.
+nl_after_vbrace_open                     = true     # false/true
+
+# Whether to put a newline after a brace close.
+# Does not apply if followed by a necessary ';'.
+nl_after_brace_close                     = false    # false/true
+
+# Whether to alter newlines in '#define' macros
+nl_define_macro                          = false    # false/true
+
+# Whether to not put blanks after '#ifxx', '#elxx', or before '#endif'
+nl_squeeze_ifdef                         = false    # false/true
+
+# Add or remove newline before 'if'
+nl_before_if                             = ignore   # ignore/add/remove/force
+
+# Add or remove newline after 'if'
+nl_after_if                              = ignore   # ignore/add/remove/force
+
+# Add or remove newline before 'for'
+nl_before_for                            = ignore   # ignore/add/remove/force
+
+# Add or remove newline after 'for'
+nl_after_for                             = ignore   # ignore/add/remove/force
+
+# Add or remove newline before 'while'
+nl_before_while                          = ignore   # ignore/add/remove/force
+
+# Add or remove newline after 'while'
+nl_after_while                           = ignore   # ignore/add/remove/force
+
+# Add or remove newline before 'switch'
+nl_before_switch                         = ignore   # ignore/add/remove/force
+
+# Add or remove newline after 'switch'
+nl_after_switch                          = ignore   # ignore/add/remove/force
+
+# Add or remove newline before 'do'
+nl_before_do                             = ignore   # ignore/add/remove/force
+
+# Add or remove newline after 'do'
+nl_after_do                              = ignore   # ignore/add/remove/force
+
+# Whether to double-space commented-entries in struct/enum
+nl_ds_struct_enum_cmt                    = false    # false/true
+
+# Whether to double-space before the close brace of a struct/union/enum
+nl_ds_struct_enum_close_brace            = false    # false/true
+
+# Add or remove a newline around a class colon.
+# Related to pos_class_colon, nl_class_init_args, and pos_comma.
+nl_class_colon                           = ignore   # ignore/add/remove/force
+
+# Change simple unbraced if statements into a one-liner
+# 'if(b)\n i++;' => 'if(b) i++;'
+nl_create_if_one_liner                   = false    # false/true
+
+# Change simple unbraced for statements into a one-liner
+# 'for (i=0;i<5;i++)\n foo(i);' => 'for (i=0;i<5;i++) foo(i);'
+nl_create_for_one_liner                  = false    # false/true
+
+# Change simple unbraced while statements into a one-liner
+# 'while (i<5)\n foo(i++);' => 'while (i<5) foo(i++);'
+nl_create_while_one_liner                = false    # false/true
+
+#
+# Positioning options
+#
+
+# The position of arithmetic operators in wrapped expressions
+pos_arith                                = ignore   # ignore/lead/trail
+
+# The position of assignment in wrapped expressions
+pos_assign                               = ignore   # ignore/lead/trail
+
+# The position of boolean operators in wrapped expressions
+pos_bool                                 = ignore   # ignore/lead/trail
+
+# The position of comparison operators in wrapped expressions
+pos_compare                              = ignore   # ignore/lead/trail
+
+# The position of conditional (b ? t : f) operators in wrapped expressions
+pos_conditional                          = ignore   # ignore/lead/trail
+
+# The position of the comma in wrapped expressions
+pos_comma                                = ignore   # ignore/lead/trail
+
+# The position of the comma in the constructor initialization list
+pos_class_comma                          = ignore   # ignore/lead/trail
+
+# The position of colons between constructor and member initialization
+pos_class_colon                          = ignore   # ignore/lead/trail
+
+#
+# Line Splitting options
+#
+
+# Try to limit code width to N number of columns
+code_width                               = 0        # number
+
+# Whether to fully split long 'for' statements at semi-colons
+ls_for_split_full                        = false    # false/true
+
+# Whether to fully split long function protos/calls at commas
+ls_func_split_full                       = false    # false/true
+
+#
+# Blank line options
+#
+
+# The maximum consecutive newlines
+nl_max                                   = 0        # number
+
+# The number of newlines after a function prototype, if followed by another 
function prototype
+nl_after_func_proto                      = 0        # number
+
+# The number of newlines after a function prototype, if not followed by 
another function prototype
+nl_after_func_proto_group                = 0        # number
+
+# The number of newlines after '}' of a multi-line function body
+nl_after_func_body                       = 2        # number
+
+# The number of newlines after '}' of a single line function body
+nl_after_func_body_one_liner             = 2        # number
+
+# The minimum number of newlines before a multi-line comment.
+# Doesn't apply if after a brace open or another multi-line comment.
+nl_before_block_comment                  = 0        # number
+
+# The minimum number of newlines before a single-line C comment.
+# Doesn't apply if after a brace open or other single-line C comments.
+nl_before_c_comment                      = 0        # number
+
+# The minimum number of newlines before a CPP comment.
+# Doesn't apply if after a brace open or other CPP comments.
+nl_before_cpp_comment                    = 0        # number
+
+# Whether to force a newline after a mulit-line comment.
+nl_after_multiline_comment               = false    # false/true
+
+# The number of newlines before a 'private:', 'public:', 'protected:', 
'signals:', or 'slots:' label.
+# Will not change the newline count if after a brace open.
+# 0 = No change.
+nl_before_access_spec                    = 0        # number
+
+# The number of newlines after a 'private:', 'public:', 'protected:', 
'signals:', or 'slots:' label.
+# 0 = No change.
+nl_after_access_spec                     = 0        # number
+
+# The number of newlines between a function def and the function comment.
+# 0 = No change.
+nl_comment_func_def                      = 0        # number
+
+# The number of newlines after a try-catch-finally block that isn't followed 
by a brace close.
+# 0 = No change.
+nl_after_try_catch_finally               = 0        # number
+
+# The number of newlines before and after a property, indexer or event decl.
+# 0 = No change.
+nl_around_cs_property                    = 0        # number
+
+# The number of newlines between the get/set/add/remove handlers in C#.
+# 0 = No change.
+nl_between_get_set                       = 0        # number
+
+# Whether to remove blank lines after '{'
+eat_blanks_after_open_brace              = true     # false/true
+
+# Whether to remove blank lines before '}'
+eat_blanks_before_close_brace            = true     # false/true
+
+#
+# Code modifying options (non-whitespace)
+#
+
+# Add or remove braces on single-line 'do' statement
+mod_full_brace_do                        = add      # ignore/add/remove/force
+
+# Add or remove braces on single-line 'for' statement
+mod_full_brace_for                       = add      # ignore/add/remove/force
+
+# Add or remove braces on single-line function definitions. (Pawn)
+mod_full_brace_function                  = ignore   # ignore/add/remove/force
+
+# Add or remove braces on single-line 'if' statement. Will not remove the 
braces if they contain an 'else'.
+mod_full_brace_if                        = add      # ignore/add/remove/force
+
+# Make all if/elseif/else statements in a chain be braced or not. Overrides 
mod_full_brace_if.
+# If any must be braced, they are all braced.  If all can be unbraced, then 
the braces are removed.
+mod_full_brace_if_chain                  = false    # false/true
+
+# Don't remove braces around statements that span N newlines
+mod_full_brace_nl                        = 0        # number
+
+# Add or remove braces on single-line 'while' statement
+mod_full_brace_while                     = add      # ignore/add/remove/force
+
+# Add or remove unnecessary paren on 'return' statement
+mod_paren_on_return                      = remove   # ignore/add/remove/force
+
+# Whether to change optional semicolons to real semicolons
+mod_pawn_semicolon                       = false    # false/true
+
+# Add parens on 'while' and 'if' statement around bools
+mod_full_paren_if_bool                   = false    # false/true
+
+# Whether to remove superfluous semicolons
+mod_remove_extra_semicolon               = false    # false/true
+
+# If a function body exceeds the specified number of newlines and doesn't have 
a comment after
+# the close brace, a comment will be added.
+mod_add_long_function_closebrace_comment = 0        # number
+
+# If a switch body exceeds the specified number of newlines and doesn't have a 
comment after
+# the close brace, a comment will be added.
+mod_add_long_switch_closebrace_comment   = 0        # number
+
+# If an #ifdef body exceeds the specified number of newlines and doesn't have 
a comment after
+# the #else, a comment will be added.
+mod_add_long_ifdef_endif_comment         = 0        # number
+
+# If an #ifdef or #else body exceeds the specified number of newlines and 
doesn't have a comment after
+# the #endif, a comment will be added.
+mod_add_long_ifdef_else_comment          = 0        # number
+
+# If TRUE, will sort consecutive single-line 'import' statements [Java, D]
+mod_sort_import                          = false    # false/true
+
+# If TRUE, will sort consecutive single-line 'using' statements [C#]
+mod_sort_using                           = false    # false/true
+
+# If TRUE, will sort consecutive single-line '#include' statements [C/C++] and 
'#import' statements [Obj-C]
+# This is generally a bad idea, as it may break your code.
+mod_sort_include                         = false    # false/true
+
+# If TRUE, it will move a 'break' that appears after a fully braced 'case' 
before the close brace.
+mod_move_case_break                      = false    # false/true
+
+# Will add or remove the braces around a fully braced case statement.
+# Will only remove the braces if there are no variable declarations in the 
block.
+mod_case_brace                           = ignore   # ignore/add/remove/force
+
+# If TRUE, it will remove a void 'return;' that appears as the last statement 
in a function.
+mod_remove_empty_return                  = false    # false/true
+
+#
+# Comment modifications
+#
+
+# Try to wrap comments at cmt_width columns
+cmt_width                                = 0        # number
+
+# Set the comment reflow mode (default: 0)
+# 0: no reflowing (apart from the line wrapping due to cmt_width)
+# 1: no touching at all
+# 2: full reflow
+cmt_reflow_mode                          = 0        # number
+
+# If false, disable all multi-line comment changes, including cmt_width and 
leading chars.
+# Default is true.
+cmt_indent_multi                         = true     # false/true
+
+# Whether to group c-comments that look like they are in a block
+cmt_c_group                              = false    # false/true
+
+# Whether to put an empty '/*' on the first line of the combined c-comment
+cmt_c_nl_start                           = false    # false/true
+
+# Whether to put a newline before the closing '*/' of the combined c-comment
+cmt_c_nl_end                             = false    # false/true
+
+# Whether to group cpp-comments that look like they are in a block
+cmt_cpp_group                            = false    # false/true
+
+# Whether to put an empty '/*' on the first line of the combined cpp-comment
+cmt_cpp_nl_start                         = false    # false/true
+
+# Whether to put a newline before the closing '*/' of the combined cpp-comment
+cmt_cpp_nl_end                           = false    # false/true
+
+# Whether to change cpp-comments into c-comments
+cmt_cpp_to_c                             = false    # false/true
+
+# Whether to put a star on subsequent comment lines
+cmt_star_cont                            = true     # false/true
+
+# The number of spaces to insert at the start of subsequent comment lines
+cmt_sp_before_star_cont                  = 0        # number
+
+# The number of spaces to insert after the star on subsequent comment lines
+cmt_sp_after_star_cont                   = 0        # number
+
+# For multi-line comments with a '*' lead, remove leading spaces if the first 
and last lines of
+# the comment are the same length. Default=true
+cmt_multi_check_last                     = true     # false/true
+
+# The filename that contains text to insert at the head of a file if the file 
doesn't start with a C/C++ comment.
+# Will substitute $(filename) with the current file's name.
+cmt_insert_file_header                   = ""         # string
+
+# The filename that contains text to insert at the end of a file if the file 
doesn't end with a C/C++ comment.
+# Will substitute $(filename) with the current file's name.
+cmt_insert_file_footer                   = ""         # string
+
+# The filename that contains text to insert before a function implementation 
if the function isn't preceded with a C/C++ comment.
+# Will substitute $(function) with the function name and $(javaparam) with the 
javadoc @param and @return stuff.
+# Will also substitute $(fclass) with the class name: void CFoo::Bar() { ... }
+cmt_insert_func_header                   = ""         # string
+
+# The filename that contains text to insert before a class if the class isn't 
preceded with a C/C++ comment.
+# Will substitute $(class) with the class name.
+cmt_insert_class_header                  = ""         # string
+
+# If a preprocessor is encountered when stepping backwards from a function 
name, then
+# this option decides whether the comment should be inserted.
+# Affects cmt_insert_func_header and cmt_insert_class_header.
+cmt_insert_before_preproc                = false    # false/true
+
+#
+# Preprocessor options
+#
+
+# Control indent of preprocessors inside #if blocks at brace level 0
+pp_indent                                = ignore   # ignore/add/remove/force
+
+# Whether to indent #if/#else/#endif at the brace level (true) or from column 
1 (false)
+pp_indent_at_level                       = false    # false/true
+
+# If pp_indent_at_level=false, specifies the number of columns to indent per 
level. Default=1.
+pp_indent_count                          = 1        # number
+
+# Add or remove space after # based on pp_level of #if blocks
+pp_space                                 = ignore   # ignore/add/remove/force
+
+# Sets the number of spaces added with pp_space
+pp_space_count                           = 0        # number
+
+# The indent for #region and #endregion in C# and '#pragma region' in C/C++
+pp_indent_region                         = 0        # number
+
+# Whether to indent the code between #region and #endregion
+pp_region_indent_code                    = false    # false/true
+
+# If pp_indent_at_level=true, sets the indent for #if, #else, and #endif when 
not at file-level
+pp_indent_if                             = 0        # number
+
+# Control whether to indent the code between #if, #else and #endif when not at 
file-level
+pp_if_indent_code                        = false    # false/true
+
+# Whether to indent '#define' at the brace level (true) or from column 1 
(false)
+pp_define_at_level                       = false    # false/true
+
+# You can force a token to be a type with the 'type' option.
+# Example:
+# type myfoo1 myfoo2
+#
+# You can create custom macro-based indentation using macro-open,
+# macro-else and macro-close.
+# Example:
+# macro-open  BEGIN_TEMPLATE_MESSAGE_MAP
+# macro-open  BEGIN_MESSAGE_MAP
+# macro-close END_MESSAGE_MAP
+#
+# You can assign any keyword to any type with the set option.
+# set func_call_user _ N_
+#
+# The full syntax description of all custom definition config entries
+# is shown below:
+#
+# define custom tokens as:
+# - embed whitespace in token using '' escape character, or
+#   put token in quotes
+# - these: ' " and ` are recognized as quote delimiters
+#
+# type token1 token2 token3 ...
+#             ^ optionally specify multiple tokens on a single line
+# define def_token output_token
+#                  ^ output_token is optional, then NULL is assumed
+# macro-open token
+# macro-close token
+# macro-else token
+# set id token1 token2 ...
+#               ^ optionally specify multiple tokens on a single line
+#     ^ id is one of the names in token_enum.h sans the CT_ prefix,
+#       e.g. PP_PRAGMA
+#
+# all tokens are separated by any mix of ',' commas, '=' equal signs
+# and whitespace (space, tab)
+#

Other related posts:

  • » [hipl-commit] [trunk] Rev 3599: adding config file for pretty printing - Rene Hummen