[HUG] Re: motor f for 203fe questions

just shortened up the tubing for my pneumatic cable release.
at 5' it works just fine with the 203fe (tubing used to be 15')

I bought the bulb and actuator on ebay years ago. The piston is extremely
very well made.
I guess the pneumatic 'slack' in the tubing was the major issue.
Still a bit of delay compared to a mechanical cable release though.

Eric

On Nov 29, 2007 5:06 PM, Q.G. de Bakker <qnu@xxxxxxxxxx> wrote:

> Eric Korenman wrote:
>
> > Speaking of which - I've never found a decent long cable release.
> > I dabbled with a pneumatic one, but could never build up enough pressure
> > to trip the Hasselblad.
> >
> > Any ideas?
>
> I'm afraid i don't.
> Long mechanical ones that are any good are horribly expensive, and still
> very short.
> And the pneumatic ones you know too.
>
> The 200(0)-series, so it appears, are rubbish for remote use.
> The EL(...) and CXi/CW with winder are very good at it.
> EL(...)s are cheap nowadays. So if you have the right lens for it...
>
>
>
>
> =============================================================================================================
> To unsubscribe from this list, go to www.freelists.org and logon to your
> account (the same e-mail address and password you set-up when you
> subscribed,) and unsubscribe from there.
>
>

Other related posts: