[HUG] NOW: ELM? Re: Re: motor f for 203fe questions

Wow - 500ELM costs 1/2 of the used 200 motor grip.
Can you trigger a 500ELM electronically?

Eric


On 11/29/07, Eric Korenman <faneuil@xxxxxxxxx> wrote:
>
> just shortened up the tubing for my pneumatic cable release.
> at 5' it works just fine with the 203fe (tubing used to be 15')
>
> I bought the bulb and actuator on ebay years ago. The piston is extremely
> very well made.
> I guess the pneumatic 'slack' in the tubing was the major issue.
> Still a bit of delay compared to a mechanical cable release though.
>
> Eric
>
> On Nov 29, 2007 5:06 PM, Q.G. de Bakker < qnu@xxxxxxxxxx> wrote:
>
> > Eric Korenman wrote:
> >
> > > Speaking of which - I've never found a decent long cable release.
> > > I dabbled with a pneumatic one, but could never build up enough
> > pressure
> > > to trip the Hasselblad.
> > >
> > > Any ideas?
> >
> >
> > I'm afraid i don't.
> > Long mechanical ones that are any good are horribly expensive, and still
> > very short.
> > And the pneumatic ones you know too.
> >
> > The 200(0)-series, so it appears, are rubbish for remote use.
> > The EL(...) and CXi/CW with winder are very good at it.
> > EL(...)s are cheap nowadays. So if you have the right lens for it...
> >
> >
> >
> > =============================================================================================================
> >
> >  To unsubscribe from this list, go to www.freelists.org and logon to
> > your account (the same e-mail address and password you set-up when you
> > subscribed,) and unsubscribe from there.
> >
> >
> >
>
>

Other related posts: