[HUG] Re: EPSON flatbed problem

Quoting Oliver Bryk, who wrote on Wed, Nov 28, 2007 at 11:36:28AM -0800 ..
> Michiel wrote:
> "Scans from a flatbed are always a bit soft. Yo should apply usm to them.
> Commercial scans already have that done during the process at the lab. i
> also read somewhere that the height of the filmholder is quit important for
> this scanner. Look
> here:http://www.photo-i.co.uk/Reviews/interactive/Epson%%0V700/page_1.htm";
> 
> Thanks for the link; that is a thorough review. I also looked at
> www.betterscanning.com, referenced in photo-i. Although the height of the
> film holder is obviously critical, I doubt that Epson would knowingly turn
> out a product that causes an out-of-focus condition in 100% of the MF cases.

Highly unlikely indeed.  And definitely not the case on my Epson 3200Photo.
You can check on www.hasselbladinfo.com for some scans I made with it.
There is a 60x60cm inkjet hanging above my head which originates from a scan
I made on this flatbed.  Hardly out of focus ;-)

Wilko

=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your 
account (the same e-mail address and password you set-up when you subscribed,) 
and unsubscribe from there.

Other related posts: