[hashcash] Re: stamp speeds on new hardware
- From: Jonathan Morton <chromi@xxxxxxxxxxxxxxxxxxxxx>
- To: hashcash@xxxxxxxxxxxxx
- Date: Thu, 22 Dec 2005 00:22:20 +0000
bas sent me a 40-bit stamp... nice:
1:40:051210:beware@xxxxxxxxx::qsCVFGF+ZkcA/B63:SNSrr
took 28 hours on the pair of below machines with 2 cores used on the
athlon64 x2. (I think the p4 prescott 3.6Ghz does not have
hyperthreading).
I unearthed an old CD which happened to have my old hashcash-1.08
binaries on it. This achieves over 10 Mh/sec per CPU on my 2.3GHz G5
- without any fancy GCC4 tricks, and possibly even lacking some of my
later optimisations. Thus, as I've just set off a pair of 40-bit
minters on it, I expect to have a result in about 14 hours' time.
--------------------------------------------------------------
from: Jonathan "Chromatix" Morton
mail: chromi@xxxxxxxxxxxxxxxx
website: http://www.chromatix.uklinux.net/
tagline: The key to knowledge is not to rely on people to teach you it.
- References:
- [hashcash] stamp speeds on new hardware
- From: Adam Back
Other related posts:
- » [hashcash] stamp speeds on new hardware
- » [hashcash] Re: stamp speeds on new hardware
- » [hashcash] Re: stamp speeds on new hardware
- » [hashcash] Re: stamp speeds on new hardware
- » [hashcash] Re: stamp speeds on new hardware
- » [hashcash] Re: stamp speeds on new hardware
- » [hashcash] Re: stamp speeds on new hardware
bas sent me a 40-bit stamp... nice:
1:40:051210:beware@xxxxxxxxx::qsCVFGF+ZkcA/B63:SNSrr
took 28 hours on the pair of below machines with 2 cores used on the athlon64 x2. (I think the p4 prescott 3.6Ghz does not have hyperthreading).
- [hashcash] stamp speeds on new hardware
- From: Adam Back