[openbeos] Re: Network driver RTL8029 for Haiku?

Am 21.08.2007 um 21:12 schrieb Axel Dörfler:


Michael Pfeiffer <michael.w.pfeiffer@xxxxxxxxx> wrote:

BTW Haiku does not boot under Parallels if etherpci is installed on
the image.
Which is not too surprising, as that driver it thought to work with the 
Realtek 8029 card :-)
So your best option is probably to fix that driver to work with
Parallels...


Thanks for the information.

These are the last lines from the log, then the boot process halts.
Any ideas what goes wrong?
get_device_interface: ask "network/devices/ethernet/v1" for /dev/net/ etherpci/0 
ipv4_datalink_init(/dev/net/etherpci/0)
etherpci: open net/etherpci/0 dev=90877a00
etherpci: reg_base=4c00
ne2000 pci ethernet card found - 00:1c:42:97:af:ad
Interrupts installed at a
etherpci: control: ETHER_INIT
etherpci: control: GET_ADDR
register_domain(4, link)

- Michael

Other related posts: