[openbeos] Re: Installing to a partition from linux
- From: Fredrik Ekdahl <fekdahl@xxxxxxxxx>
- To: openbeos@xxxxxxxxxxxxx
- Date: Fri, 17 Aug 2007 13:44:34 +0200
On Friday 17 August 2007 10.34.05 Axel Dörfler wrote:
> Fredrik, can you check if the BFS partition header looks correct? It
> should have a 0x55aa at position 510, and the 4 bytes immediately
> before that (starting with offset 506) should contain the absolute
> partition offset in 512 byte blocks.
Yes, it does look correct. And the offset is the same as reported by Parted.
On Thursday 16 August 2007 12.43.51 Axel Dörfler wrote:
> Have you tried to let Qemu boot from your native device and see if that
> gives you a different output?
I just tried running:
sudo qemu -hda /dev/sda6 -m 256
and the output was "Failed to load OS. Press any key to reboot..._"
Is there anything else I can try?
Thanks for your help.
/Fredrik Ekdahl
- Follow-Ups:
- [openbeos] Re: Installing to a partition from linux
- From: Axel Dörfler
- References:
- [openbeos] Re: Installing to a partition from linux
- From: Axel Dörfler
Other related posts:
- » [openbeos] Installing to a partition from linux
- » [openbeos] Re: Installing to a partition from linux
- » [openbeos] Re: Installing to a partition from linux
- » [openbeos] Re: Installing to a partition from linux
- » [openbeos] Re: Installing to a partition from linux
- » [openbeos] Re: Installing to a partition from linux
- » [openbeos] Re: Installing to a partition from linux
- » [openbeos] Re: Installing to a partition from linux
- » [openbeos] Re: Installing to a partition from linux
- » [openbeos] Re: Installing to a partition from linux
- » [openbeos] Re: Installing to a partition from linux
- » [openbeos] Re: Installing to a partition from linux
- [openbeos] Re: Installing to a partition from linux
- From: Axel Dörfler
- [openbeos] Re: Installing to a partition from linux
- From: Axel Dörfler