[openbeos] Haiku boot problems.


So the Haiku build is now working for me again!  Woohoo.

I went ahead and installed Haiku onto a separate partition and attempted to boot it... The Haiku logo pops up, but never goes away :-) 

The last few lines of the debug log shows:

bfs: mounted "Haiku" (root node at 524288, device = /dev/disk/ata/0/slave/2)
module: Search for file_cache/launch_speedup/v1 failed.
** could not open launch speedup!
con_init: trying module console/frame_buffer/v1
loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/console
loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/dprintf
loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/keyboard
loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/null
loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/random
loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/tty
loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/zero

The full debug log is available at http://68.45.180.45/haiku-default.txt

If I tell it to boot into safe mode, the debug log stops at the same point, but I do get dumped to the Haiku shell prompt.

Any ideas on this one? :-)

Adam



Other related posts: