[openbeos] Re: Haiku, Virtual PC 2007, and networking

François Revol wrote:

I use the tulip driver in Haiku, works quite well AFAIK.
Under Zeta I have to ifconfig down; dhconfig off; dhconfig on at boot to get DHCP working, but IIRC it works in Haiku so it might be BONE's fault.
I tend to think it was probably Zeta's fault. My previous/normal development machine had a Linksys ethernet card based on a DEC chipset and used the tulip driver under net_server, R5+BONE, and Be's internal "Exp" (which Zeta was based on) flawlessly. Bernd & company probably made some changes that affected either their version of BONE or the driver. Then again, I've never owned a copy of Zeta to know see if I might have encountered the same problems. 

Raymond


--
Raymond C. Rodgers
http://www.raymondrodgers.com/

Other related posts: