[haiku-development] Booting problems.

I'm attempting to get haiku to boot on a dual Xeon machine I have at work.  
It's installed to the first primary partition on slave drive on the primary 
IDE controller.    It stops with:

Welcome to the Haiku boot loader!
number of drives: 4
add_partitions_for(0x00105714, mountFS = no)
add_partitions_for(fd = 0, mountFS = no)
0x00105a90 Partition::Partition
0x00105a90 Partition::Scan()
check for partitioning_system: Amiga Partition Map
check for partitioning_system: EFI GUID Partition Map
check for partitioning_system: Intel Partition Map
  priority: 810
check for partitioning_system: Intel Extended Partition
check for partitioning_system: Apple Partition Map

The full log file is here:

http://pastebin.com/m62dfa84c

If I boot into FreeBSD and use the -hda argument to point to the physical 
drive, it boots up just fine.

Any ideas how I can track down the problem here?

Adam


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

Other related posts: