[haiku-bugs] [Haiku] #8533: S-ATA and AHCI boot problem

  • From: "Morbid" <trac@xxxxxxxxxxxx>
  • Date: Sun, 06 May 2012 18:20:51 -0000

#8533: S-ATA and AHCI boot problem
--------------------------+-------------------------------
 Reporter:  Morbid        |        Owner:  marcusoverhagen
     Type:  bug           |       Status:  new
 Priority:  normal        |    Milestone:  R1
Component:  Drivers/Disk  |      Version:  R1/alpha3
 Keywords:                |   Blocked By:
 Blocking:                |  Has a Patch:  0
 Platform:  All           |
--------------------------+-------------------------------
 My Pc is setup in plain AHCI-Mode. 2 HD-drives, 1 DVD-Burner and 1 DVD-ROM
 all attached to S-ATA. Burned hrev44108 x86 gcc2hybrid-anyboot to a CDRW
 and trying to boot the machine. The PC boots up from DVD-Device and
 automatically
 the Boot-Manager of Haiku starts.
 No DVD or HD will detect. It's not possible to scan for Boot-Devices and
 only
 the Reboot-Option is available.
 Booting up the PC with USB-Stick and mount the two HD-Devices (both Ntfs)
 works.
 Tried Haiku R1 alpha 3 and other Hrev's, too.
 Than i changed the Option S-ATA as IDE in the Bios with the same effect.

 MainBoard: ASUS 939A785GMH/128M

 CPU: AMD Athlon 64 3200+

 RAM: 4 GByte

 HD's S-ATA: Samsung HD103SJ ATA and WDC WD15EARS-00Z5B1 ATA

 DVD's S-ATA: HL-DT-ST DVDRAM GH22LS50 ATA  (DVD-Burner) and Optiarc DVD-
 ROM DDU1681S ATA

 Chipset's: Northbridge AMD 785G and Southbridge AMD SB710

 S-ATA: Controller detected by Windows - Standart AHCI 1.0 Serial ATA  (no
 Problems under Windows)

-- 
Ticket URL: <http://dev.haiku-os.org/ticket/8533>
Haiku <http://dev.haiku-os.org>
Haiku - the operating system.

Other related posts: