[haiku-bugs] Re: [Haiku] #5968: DriveSetup install problem

  • From: "bonefish" <trac@xxxxxxxxxxxx>
  • Date: Tue, 25 May 2010 15:51:38 -0000

#5968: DriveSetup install problem
-------------------------------------+--------------------------------------
 Reporter:  oxoocoffee               |       Owner:  stippi   
     Type:  bug                      |      Status:  new      
 Priority:  normal                   |   Milestone:  R1       
Component:  Applications/DriveSetup  |     Version:  R1/alpha2
 Keywords:  Unknown Partition Type   |    Platform:  x86      
Blockedby:                           |       Patch:  0        
 Blocking:                           |  
-------------------------------------+--------------------------------------

Comment(by bonefish):

 Replying to [comment:4 axeld]:
 > I just talked to Robert, and we found out that the reason this happens
 is because he did not create an Intel partition in the empty spot, but
 instead initialized it with BFS.
 >
 > This shouldn't be allowed by DriveSetup, but the better solution would
 be to automatically create a partition in the spot if the user does that.

 Sure this should be allowed. That's how one would initialize a partition-
 less USB stick. According to the syslog the BFS volume is detected
 correctly, BTW:
 {{{
 580     device 0: /dev/disk/ata/0/master/raw
 581       media status:      No error
 582       device flags:      2
 583       offset:            0
 584       size:              320072933376 (305245.335 MB)
 585       content size:      320072933376
 586       block size:        2048
 587       child count:       0
 588       index:             -1
 589       status:            0
 590       flags:             3
 591       volume:            -1
 592       disk system:       file_systems/bfs/v1
 593       name:              <NULL>
 594       content name:      Haiku
 595       type:              <NULL>
 596       content type:      Be File System
 597       params:            <NULL>
 598       content params:    <NULL>
 }}}

 The syslog is missing the boot loader part BTW. It would be interesting to
 see the syslog of a boot from the hard disk (continued on CD).

 Installing an MBR on a disk initialized this way renders it unbootable,
 BTW. Just in case that happened.

 After following your instructions in qemu (with the R1 alpha 2 ISO CD
 image and a 700 MB disk image) up to point 9, the system boots fine from
 disk and DriveSetup shows the setup correctly.

-- 
Ticket URL: <http://dev.haiku-os.org/ticket/5968#comment:5>
Haiku <http://dev.haiku-os.org>
Haiku - the operating system.

Other related posts: