Time to check syslogs then ;) Can you enable syslog output in ~/config/seeting/kernel/drvers/kernel and send me the log file after a restart with the dongle in? regards! 2008/5/25 Andreas Färber <andreas.faerber@xxxxxx>: > > Am 24.05.2008 um 15:58 schrieb Oliver Ruiz Dorantes: > > All seems fine in your dongle features(class device is algo correct), >> according by the vendor ID... could it be a Broadcom one? they make buggy >> devices... & i AFAIK sometimes u need to load Firmware on them, and i have >> not worked in this support :( >> > > I tested many different dongles, the Sitecom was a CSR (the reference > chipset for BlueZ), some others Broadcom, one Silicon Wave, one AVM. > > Except for one Broadcom-based Belkin F8T012xx1 (which was being recognized > as WLAN dongle instead) they all worked fine under Linux. Don't know if > Marcel et al. do anything with Firmware there. > > Have you got something published in /dev/bluetooth/... ? >> > > No, never. > > Regards, > > Andreas > > -- Oliver, http://urnenfeld.blogspot.com