[hackpgh-discuss] Re: Sweeping

The dust situation has always been an issue in the shop. When we moved in we
did the same thing, sweep and sweep and sweep, and it never seemed to stop.
A lot of dust blows in from the street along with just the crumbling of the
building. Add to this the recent constant saw dust from 3 or 4 projects and
we have a lot of dust. We can try to get a new broom but nothing is going to
beat diligence in just sweeping more often.

Thanks,
Matt

On Wed, Jun 1, 2011 at 10:08 AM, jeff kramer <jeffkramr@xxxxxxxxx> wrote:

> Less that and more that we have a ventilation/filtration problem... We
> could use a better broom though.
>
> Jeff
> On Jun 1, 2011 10:06 AM, "j. eric townsend" <jet@xxxxxxxxxxxx> wrote:
> > Does the shop need a better/different broom? We swept before the
> > el-wire class then again after and it seemed like there was as much
> > stuff on the floor each time. Do we have a "fine pitch" push broom?
> >
> > On 6/1/11 10:00, Matt Stultz wrote:
> >> A regular guest to the shop was kind enough last night to point out how
> >> dirty the shops floors are right now. If any of you are looking for a
> >> way to get some volunteer time in it would really help to get the floors
> >> swept. This is something that can happen every week if not a few times a
> >> week. It only takes a few minutes but really helps improve the overall
> >> cleanliness of the shop.
> >>
> >> Thanks,
> >> Matt
> >
> >
> > --
> > J. Eric Townsend
> > design: www.allartburns.org; hacking: www.flatline.net; HF: KG6ZVQ
> > PGP: 0xD0D8C2E8 AC9B 0A23 C61A 1B4A 27C5 F799 A681 3C11 D0D8 C2E8
> >
>

Other related posts: