[hackpgh-discuss] Re: Serial Adapter
- From: Douglas Philips <dgou@xxxxxxx>
- To: hackpgh-discuss@xxxxxxxxxxxxx
- Date: Tue, 20 Mar 2012 13:28:46 -0400
Great, I too would like to figure that out too!
I was using an Arduino on one end, an Android phone on the other.
Had set up the Arduino to pass serial through from the host computer, but was't
able to change anything on the MDFLy BT module.
Fortunately it passed traffic through just fine, so I lived with the defaults.
-=D
On 2012 Mar 20, at 1:16 PM, Sayan Chakraborty wrote:
> The mdfly bluetooth module with Breakout uses ttl 5v serial.
> The baudrate can be set using the AT command from serial terminal.
>
> You need to send a command to change mode to AT command mode. We can work on
> it on Wednesday
>
> --
> Sent from my Verizon Wireless 4G LTE DROID
>
> On Mar 20, 2012 11:33 AM, "Elijah Richter" <elirichter@xxxxxxxxx> wrote:
> I got an MDFLY Bluetooth usb adatper (were you the one who recommended it
> Sayan?) and I'm trying to set it up (specifically set the baud rate) but not
> having much luck. The instructions on MDFLY are vague at best, they say I
> have to send AT commands but don't say how, but I'm assuming that means
> sending them through the serial lines and not Bluetooth link. Whichever
> cable is more appropriate, assuming I'm on the right track, bring that one...
> If you could help me out at the meeting I'd really appreciate it.
>
> Thanks!
> -Eli
>
> On Tue, Mar 20, 2012 at 11:17 AM, Sayan Chakraborty <c.sayan@xxxxxxxxx> wrote:
> I have a 5v FTDI cable and a usb-serial. Please let me know what works for
> you and i will bring it over tomorrow night
>
> --
> Sent from my Verizon Wireless 4G LTE DROID
>
> On Mar 20, 2012 11:06 AM, "Elijah Richter" <elirichter@xxxxxxxxx> wrote:
> Hey, does anyone have a usb to serial adapter that I could use briefly during
> Wednesday's meeting, or has anyone seen one during cleanup at the shop?
>
> -Eli
>
Other related posts:
