[guispeak] Re: Braille Lite 2000 and WinDisk
- From: "Laura Eaves" <leaves1@xxxxxxxxxxxxxxx>
- To: <guispeak@xxxxxxxxxxxxx>
- Date: Sat, 22 Jan 2005 23:00:22 -0500
Hi Keith --
You need to start windisk on both the PC and on the braille lite
Go to the options menu and find the option -- I think it's way down at the
end, but I can't remember the quick key to get to it -- either w or w-chord.
Then you can see both the braille lite file system and the PC current folder
on your PC.
Good luck.
--le
----- Original Message -----
From: "Keith Bundy" <okb@xxxxxxxxxxxxx>
To: <guispeak@xxxxxxxxxxxxx>; <vicug-l@xxxxxxxxxxxxxxxxxxxxx>
Sent: Saturday, January 22, 2005 6:28 PM
Subject: [guispeak] Braille Lite 2000 and WinDisk
I recently purchased a Braille Lite 2000. It has the latest update, and I
am trying to run Windisk 3.5 with it in order to transfer some files. When
I try to run WinDisk, I get the message that the note taker cannot be
detected.
I really need to transfer some files this evening, if possible. If anyone
has a clue as to what I might do, feel free to email off-list, as I know
this is a bit off-topic.
FYI, I have the serial port on, half-duplex, 8 stop bits, 1 data bit, no
parity, and software handshaking set in my braille Lite, and I am running it
with Windows XP Home Edition.
Thanks for any help you may be able to give me.
Keith Bundy
605-480-0976
okb@xxxxxxxxxxxxx
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.7.1 - Release Date: 1/19/2005
** To leave the list, click on the immediately-following link:-
** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** guispeak-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** guispeak-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** guispeak-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** guispeak-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
