[gptalk] Re: gpmonitor tool

  • From: "Darren Mar-Elia" <darren@xxxxxxxxxx>
  • To: <gptalk@xxxxxxxxxxxxx>
  • Date: Mon, 12 Feb 2007 08:41:01 -0800

I haven't looked at GPMonitor in a long time but I'm pretty sure it requires
GPMC to be installed on the machine where it runs to get RSOP.


-----Original Message-----
From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx] On
Behalf Of mwnewell@xxxxxxxxxxxxxxxxxxxxxx
Sent: Monday, February 12, 2007 7:06 AM
To: gptalk@xxxxxxxxxxxxx
Subject: [gptalk] gpmonitor tool

I have installed Microsoft's GPmonitor tool.
The tool appears to work okay until you right click on a
machinepolicyrefresh to generate a RSOP report.
No report and no view is generated or if one is generated there is no data
to view.
Any ideas as to what could be the cause of this problem?

Thanks!

Mark Newell
Network Administrator
Blanchard Machinery
3151 Charleston Highway
West Columbia, SC 29172
mailto:mwnewell@xxxxxxxxxxxxxxxxxxxxxx
office phone: (803) 926-4141
mobile: (803) 513-6341
fax: (803) 791-9874
Visit us on the web at www.blanchardmachinery.com
We are your South Carolina Caterpillar Dealer

***********************
You can unsubscribe from gptalk by sending email to
gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR by
logging into the freelists.org Web interface. Archives for the list are
available at http://www.freelists.org/archives/gptalk/
************************

***********************
You can unsubscribe from gptalk by sending email to 
gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR by 
logging into the freelists.org Web interface. Archives for the list are 
available at http://www.freelists.org/archives/gptalk/
************************

Other related posts: