It also does not tell it if it is a REG_DWORD or a REG_BINARY should this not be specified in the template? I do get to option to specify the value when I enable a setting (EditFlags & BrowserFlags). So I am not sure what you mean by 0 or 1 when enabeling or disabeling, this should not effect the REG_DWORD value, should it? -----Original Message----- From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx] On Behalf Of Darren Mar-Elia Sent: Thursday, September 20, 2007 12:01 PM To: gptalk@xxxxxxxxxxxxx Subject: [gptalk] Re: "browse in same window" option in Windows Explorer You're probably going to have to edit that ADM a bit. Normally, in the absence of any direction in the ADM, enabled will set the value to 1 and disabled to 0, which you probably don't necessarily want. Darren -----Original Message----- From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx] On Behalf Of Piet Slaghekke Sent: Thursday, September 20, 2007 8:51 AM To: gptalk@xxxxxxxxxxxxx Subject: [gptalk] Re: "browse in same window" option in Windows Explorer Of course they would be! (-: Yes it is showing up there, I was looking under local user!! So the settings are there but not configured. Should they have values or is this something I have to add myself... I see from the adm file that there are no values.. Of course that is why it is called a template. Thanks Darren! -----Original Message----- From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx] On Behalf Of Darren Mar-Elia Sent: Thursday, September 20, 2007 11:39 AM To: gptalk@xxxxxxxxxxxxx Subject: [gptalk] Re: "browse in same window" option in Windows Explorer Well, it looks like it will be under Computer Configuration\Admin templates\"Software\Classes\Word.Document.8" It could be having problems parsing the Category with the backslashes. What I would do, if you don't find the policy in the location above, is rename the Category tag below to something without backslashes, like "Word File Associations" Darren -----Original Message----- From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx] On Behalf Of Piet Slaghekke Sent: Thursday, September 20, 2007 8:32 AM To: gptalk@xxxxxxxxxxxxx Subject: [gptalk] Re: "browse in same window" option in Windows Explorer CLASS MACHINE CATEGORY "SOFTWARE\Classes\Word.Document.8" KEYNAME "SOFTWARE\Classes\Word.Document.8" POLICY Default PART Default EDITTEXT DEFAULT "Microsoft Word Document" VALUENAME "" END PART END POLICY POLICY "EditFlags" PART "EditFlags" NUMERIC VALUENAME "EditFlags" END PART END POLICY POLICY "BrowserFlags" PART "BrowserFlags" NUMERIC VALUENAME "BrowserFlags" END PART END POLICY END CATEGORY -----Original Message----- From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx] On Behalf Of Darren Mar-Elia Sent: Thursday, September 20, 2007 11:30 AM To: gptalk@xxxxxxxxxxxxx Subject: [gptalk] Re: "browse in same window" option in Windows Explorer Well, it depends upon how the ADM was written. Maybe you can post it here and we can get a better sense of where to look. Darren -----Original Message----- From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx] On Behalf Of Piet Slaghekke Sent: Thursday, September 20, 2007 8:28 AM To: gptalk@xxxxxxxxxxxxx Subject: [gptalk] Re: "browse in same window" option in Windows Explorer Darren, I have added the template, but I do not see it show up. Even after unchecked "show only managed policies" filter. Where do I look? -----Original Message----- From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx] On Behalf Of Darren Mar-Elia Sent: Thursday, September 20, 2007 10:53 AM To: gptalk@xxxxxxxxxxxxx Subject: [gptalk] Re: "browse in same window" option in Windows Explorer Yes, when you're in the GP editor, right-click any of the two Administrative Templates nodes, choose Add/Remove Templates and add your new template. You'll get errors right then and there if there are syntax problems with it. If not, you will not see the policies show up right away because they are preferences. So, go into View, Filtering and uncheck the box that says "show only managed policies". Darren -----Original Message----- From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx] On Behalf Of Piet Slaghekke Sent: Thursday, September 20, 2007 7:44 AM To: gptalk@xxxxxxxxxxxxx Subject: [gptalk] Re: "browse in same window" option in Windows Explorer Ok I exported the key, edited the key so that only those values are in it. Converted with regtoadm. Can I just import this template to a GPO? -----Original Message----- From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx] On Behalf Of Darren Mar-Elia Sent: Thursday, September 20, 2007 10:23 AM To: gptalk@xxxxxxxxxxxxx Subject: [gptalk] Re: "browse in same window" option in Windows Explorer Ok. Cool. Then Steve's suggestion I a good one--give regtoadm a try. Darren -----Original Message----- From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx] On Behalf Of Piet Slaghekke Sent: Thursday, September 20, 2007 7:17 AM To: gptalk@xxxxxxxxxxxxx Subject: [gptalk] Re: "browse in same window" option in Windows Explorer REG_DWORD -----Original Message----- From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx] On Behalf Of Darren Mar-Elia Sent: Wednesday, September 19, 2007 10:40 PM To: gptalk@xxxxxxxxxxxxx Subject: [gptalk] Re: "browse in same window" option in Windows Explorer What type of reg values are those Piet? Are they REG_BINARY or REG_DWORD? Darren -----Original Message----- From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx] On Behalf Of Piet Slaghekke Sent: Wednesday, September 19, 2007 6:58 PM To: gptalk@xxxxxxxxxxxxx Subject: [gptalk] Re: "browse in same window" option in Windows Explorer Ok I found it with Regshot 1.8.1 (I could not find an easy way with Regmon since it listed hundreds of registry queries, Regshot allowed me to take a snap shot before and after the changes and then compared the two and lasted listed deletions and modifications, very nice. tool!) When the browse in same window option is unchecked this key is added: HKLM\SOFTWARE\Classes\Word.Document.8\BrowserFlags: 0x00000008 I also want to set the "confirm open after download" option. Unchecking this option changes the following key: from this: HKLM\SOFTWARE\Classes\Word.Document.8\EditFlags: 0x00000000 to this: HKLM\SOFTWARE\Classes\Word.Document.8\EditFlags: 0x00010000 so how do I create an adm template to push this setting out through a GPO? *********************** You can unsubscribe from gptalk by sending email to gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR by logging into the freelists.org Web interface. Archives for the list are available at //www.freelists.org/archives/gptalk/ ************************ *********************** You can unsubscribe from gptalk by sending email to gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR by logging into the freelists.org Web interface. Archives for the list are available at //www.freelists.org/archives/gptalk/ ************************ *********************** You can unsubscribe from gptalk by sending email to gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR by logging into the freelists.org Web interface. Archives for the list are available at //www.freelists.org/archives/gptalk/ ************************ *********************** You can unsubscribe from gptalk by sending email to gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR by logging into the freelists.org Web interface. Archives for the list are available at //www.freelists.org/archives/gptalk/ ************************ *********************** You can unsubscribe from gptalk by sending email to gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR by logging into the freelists.org Web interface. Archives for the list are available at //www.freelists.org/archives/gptalk/ ************************ *********************** You can unsubscribe from gptalk by sending email to gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR by logging into the freelists.org Web interface. Archives for the list are available at //www.freelists.org/archives/gptalk/ ************************ *********************** You can unsubscribe from gptalk by sending email to gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR by logging into the freelists.org Web interface. Archives for the list are available at //www.freelists.org/archives/gptalk/ ************************ *********************** You can unsubscribe from gptalk by sending email to gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR by logging into the freelists.org Web interface. Archives for the list are available at //www.freelists.org/archives/gptalk/ ************************ *********************** You can unsubscribe from gptalk by sending email to gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR by logging into the freelists.org Web interface. Archives for the list are available at //www.freelists.org/archives/gptalk/ ************************ *********************** You can unsubscribe from gptalk by sending email to gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR by logging into the freelists.org Web interface. Archives for the list are available at //www.freelists.org/archives/gptalk/ ************************ *********************** You can unsubscribe from gptalk by sending email to gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR by logging into the freelists.org Web interface. Archives for the list are available at //www.freelists.org/archives/gptalk/ ************************ *********************** You can unsubscribe from gptalk by sending email to gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR by logging into the freelists.org Web interface. Archives for the list are available at //www.freelists.org/archives/gptalk/ ************************