[gptalk] Re: WMI Filtering PDCE NTP Settings

  • From: "Nelson, Jamie" <Jamie.Nelson@xxxxxxx>
  • To: <gptalk@xxxxxxxxxxxxx>
  • Date: Wed, 18 Jun 2008 14:20:09 -0500

I would usually just set that in the local GPO on the PDCE so you don't
have to mess with a WMI filter. You only need to do it on one box
basically, so there is really no need to create a domain GPO.

 

Although I understand your point about the PDCE role moving, how often
does that really happen?

 

Jamie Nelson | Infrastructure Consultant | BI&T Operations | Devon
Energy | Work: 405.552.8054 | http://www.dvn.com <http://www.dvn.com/> 

 

From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx]
On Behalf Of Crosby, Damian (IT)
Sent: Wednesday, June 18, 2008 11:41 AM
To: gptalk@xxxxxxxxxxxxx
Subject: [gptalk] WMI Filtering PDCE NTP Settings

 

 

Does anyone use a GPO to control time settings (source NTP servers
amongst others)? Further to ensure that settings are applied in the
event of the FSMO PDCE role being moved does anyone filter using WMI to
ensure its applied to only the PDCE? eg: select * from
Win32_ComputerSystem where DomainRole = 5

 

Thanks!

________________________________

NOTICE: If received in error, please destroy and notify sender. Sender
does not intend to waive confidentiality or privilege. Use of this email
is prohibited when received in error.


Confidentiality Warning: This message and any attachments are intended only for 
the use of the intended recipient(s), are confidential, and may be privileged. 
If you are not the intended recipient, you are hereby notified that any review, 
retransmission, conversion to hard copy, copying, circulation or other use of 
all or any portion of this message and any attachments is strictly prohibited. 
If you are not the intended recipient, please notify the sender immediately by 
return e-mail, and delete this message and any attachments from your system. 

Other related posts: