I ran a gpresult on VistaRC1 and gpresult doesn't show the Computer settings section of GPResult? Here is a capture of the Gpresult - Notice there is not a Computer settings section: U:\>psexec \\vistarc1_9-1-06 -u DA\Vista -p V1staOS cmd PsExec v1.31 - execute processes remotely Copyright (C) 2001-2002 Mark Russinovich www.sysinternals.com Microsoft Windows [Version 6.0.5600] Copyright (c) 2006 Microsoft Corporation. All rights reserved. C:\Windows\system32>hostname VistaRC1_9-1-06 C:\Windows\system32>gpresult Microsoft (R) Windows (R) Operating System Group Policy Result tool v2.0 Copyright (C) Microsoft Corp. 1981-2001 Created On 9/15/2006 at 9:45:08 AM RSOP data for DA\Vista on VISTARC1_9-1-06 : Logging Mode --------------------------------------------------------- OS Type: Microsoftr Windows VistaT Ultimate OS Configuration: Member Workstation OS Version: 6.0.5600 Site Name: N/A Roaming Profile: N/A Local Profile: C:\Users\Vista Connected over a slow link?: No USER SETTINGS (here is the user settings - but no Computer settings showed up?) -------------- CN=VistaTester,OU=IT Users,OU=User Policies,OU=Active Group Policies,DC=mydomain,DC=com Last time Group Policy was applied: 9/15/2006 at 8:40:40 AM Group Policy was applied from: domaincontroller.mydomain.com Group Policy slow link threshold: 500 kbps Domain Name: DA Domain Type: Windows 2000 (actually 2003 domain and forest) Applied Group Policy Objects ----------------------------- User - Printer - These specific PCs get the 8000 and 8550 Printer Default Domain Policy User -AD IT Group to added to Local Computer Admin Group User -All Mapped Drives User -Screen Saver Lock Computer after 1 hours inactivity User -IE Changes for IT User -Disable Offline Folder Synchronization User -My Documents Folder Redirection Default Domain Policy The following GPOs were not applied because they were filtered out ------------------------------------------------------------------- Computer -Disable Windows Security Center Filtering: Disabled (GPO) Computer - Symantec Auto Install IT Group Filtering: Not Applied (Empty) Computer -Disable OS Firewall while on Domain Filtering: Disabled (GPO) Local Group Policy Filtering: Not Applied (Empty) Local Group Policy Filtering: Not Applied (Empty) The user is a part of the following security groups --------------------------------------------------- Domain Users Everyone BUILTIN\Users NT AUTHORITY\INTERACTIVE NT AUTHORITY\Authenticated Users This Organization LOCAL Medium Mandatory Level It doesn't matter if I am sitting in front of the pc or using psexec I can not get gpresult to show the computer settings portion of gpresult. (psexec no longer works in interactive mode by the way, even using a local username and password, it still works in default mode though) Mark Mills Office Phone: 281-444-2300 x113 Email: mark.mills@xxxxxxxxxxxxxxxxxxxxxx