[gptalk] Re: Remote Policy

Correct, that would work.  We are investigating all the required
settings.  

HKLM\Software\Policies and
HKLM\Software\Microsoft\CurrentVersion\Windows\Policies and the same
under HKCU 

Thank you.

Doug Delaney
EDS - Integration Engineering-GM
GM Desktop Engineering
1075 W. Entrance Dr., MS 2B, Cube 2130
Auburn Hills, MI 48326
Lab: 248-365-9187
Tel: 248-754-7917
Pg: 248-870-0306 pager
Mail: Doug.Delaney@xxxxxxx 
Note: The information in this email is intended solely for the
addressee. Access to this email by anyone else is unauthorized. If you
are not the intended recipient, any disclosure, copying, distribution or
any action taken or omitted to be taken in reliance on it is prohibited.


-----Original Message-----
From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx]
On Behalf Of Nelson, Jamie R Contr 72 CS/SCBAF
Sent: Wednesday, September 19, 2007 3:31 PM
To: gptalk@xxxxxxxxxxxxx
Subject: [gptalk] Re: Remote Policy

In that case there is not much you can do via Group Policy itself. If
the firewall settings are the only thing you "really" need, just export
the HKLM\SOFTWARE\Policies\Microsoft\WindowsFirewall registry key from a
LAN workstation that is receiving the policy and distribute it via other
means (e-mail, file share) to your remote users in the form of a .reg
file. This would only work, though, if they have the local admin rights
required to change that area of the registry.

It's not really the proper way to do things, but it should work.

Regards,
Jamie


-----Original Message-----
From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx]
On Behalf Of Delaney, Doug
Sent: Wednesday, September 19, 2007 2:19 PM
To: gptalk@xxxxxxxxxxxxx
Subject: [gptalk] Re: Remote Policy

Understood, but General Motors will not allow replacement of the msgina.
Therefore, the VPN solution cannot change that approach
 

Doug Delaney
EDS - Integration Engineering-GM
GM Desktop Engineering
1075 W. Entrance Dr., MS 2B, Cube 2130
Auburn Hills, MI 48326
Lab: 248-365-9187
Tel: 248-754-7917
Pg: 248-870-0306 pager
Mail: Doug.Delaney@xxxxxxx <mailto:Doug.Delaney@xxxxxxx>
Note: The information in this email is intended solely for the
addressee. Access to this email by anyone else is unauthorized. If you
are not the intended recipient, any disclosure, copying, distribution or
any action taken or omitted to be taken in reliance on it is prohibited.

 


________________________________

        From: gptalk-bounce@xxxxxxxxxxxxx
[mailto:gptalk-bounce@xxxxxxxxxxxxx] On Behalf Of Odiorne, Derek
        Sent: Wednesday, September 19, 2007 3:13 PM
        To: gptalk@xxxxxxxxxxxxx
        Subject: [gptalk] Re: Remote Policy
        
        

        Cisco, for example, has an option to start the vpn before logon.
By doing it this way the users will run Group Policy Object's when
logging on.

         

        ----------------------------

        Derek A. Odiorne

        574-245-1487
        -----------------------------
        Need help now?
        http://intranet/techserv/technologyserv.htm
<http://intranet/techserv/technologyserv.htm> 

        
________________________________


        From: gptalk-bounce@xxxxxxxxxxxxx
[mailto:gptalk-bounce@xxxxxxxxxxxxx] On Behalf Of Delaney, Doug
        Sent: Wednesday, September 19, 2007 3:07 PM
        To: gptalk@xxxxxxxxxxxxx
        Subject: [gptalk] Remote Policy

         

        Hi all, 

        Is anyone aware of any free tools available for the remote
distribution of a GPO policy? 

        Here is our situation.  We have a couple thousand users who
connect via VPN only.  They connect after boot-up and cached credential
logon to windows.  Therefore, policies never apply during startup or
logon.  We have a need to administer the XP firewall (among other
things), and are having a very difficult time finding a solution.  Many
of these users are 8 hours away from a building where they can connect
via a local LAN to get policies.

        Any guidance is greatly appreciated. 

        Doug Delaney
        EDS - Integration Engineering-GM
        GM Desktop Engineering
        1075 W. Entrance Dr., MS 2B, Cube 2130
        Auburn Hills, MI 48326
        Lab: 248-365-9187
        Tel: 248-754-7917
        Pg: 248-870-0306 pager
        Mail: Doug.Delaney@xxxxxxx <mailto:Doug.Delaney@xxxxxxx>  
        Note: The information in this email is intended solely for the
addressee. Access to this email by anyone else is unauthorized. If you
are not the intended recipient, any disclosure, copying, distribution or
any action taken or omitted to be taken in reliance on it is prohibited.

         

***********************
You can unsubscribe from gptalk by sending email to
gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR
by logging into the freelists.org Web interface. Archives for the list
are available at http://www.freelists.org/archives/gptalk/
************************
***********************
You can unsubscribe from gptalk by sending email to 
gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR by 
logging into the freelists.org Web interface. Archives for the list are 
available at http://www.freelists.org/archives/gptalk/
************************

Other related posts: