[gptalk] Re: Registry to ADM

  • From: "Sunshine Baines" <sunshine.baines@xxxxxxxxx>
  • To: gptalk@xxxxxxxxxxxxx
  • Date: Mon, 24 Mar 2008 21:17:56 -0400

I tried that and got an error when importing it.  Attached is the
error.  Below is the modification I did.

CLASS MACHINE

CATEGORY "SYSTEM\CurrentControlSet\Control\CrashControl"
KEYNAME "SYSTEM\CurrentControlSet\Control\CrashControl"

 POLICY "AutoReboot"
  PART "AutoReboot"
  VALUEON NUMERIC 1
  VALUEOFF Numeric 0
  VALUENAME "AutoReboot"
  END PART
 END POLICY

END CATEGORY


On Mon, Mar 24, 2008 at 9:09 PM, Darren Mar-Elia <darren@xxxxxxxxxx> wrote:
> Try replacing "Numeric" in that policy with the following:
>
> VALUEON NUMERIC 1
> VALEOFF NUMERIC 0
>
> That will make Enabled 1 and Disabled 0.
>
> Darren
>
> -----Original Message-----
> From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx] On
> Behalf Of Sunshine Baines
>
> Sent: Monday, March 24, 2008 5:57 PM
> To: gptalk@xxxxxxxxxxxxx
> Subject: [gptalk] Re: Registry to ADM
>
> When I disable mine it deletes it from the registry.
>
> On Mon, Mar 24, 2008 at 8:43 PM, Darren Mar-Elia <darren@xxxxxxxxxx> wrote:
> > For any numeric policies, unless you specify otherwise in the ADM,
> enabling
> > the policy sets it to 1 and disabling it sets it to 0.
> >
> > Darren
> >
> > -----Original Message-----
> > From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx] On
> > Behalf Of Sunshine Baines
> > Sent: Monday, March 24, 2008 5:34 PM
> > To: gptalk@xxxxxxxxxxxxx
> >
> > Subject: [gptalk] Re: Registry to ADM
> >
> > Ok I think I got it working, but it will not let me choos a value of 0
> > and autmatically sets it to 1.  What exactly am I missing in my ADM,
> > so I can enter 0 in my group policy setting.
> >
> > On Mon, Mar 24, 2008 at 6:58 PM, Sunshine Baines
> > <sunshine.baines@xxxxxxxxx> wrote:
> > > Thanks for the repsonse.  Can you tak a look at my registry file and
> > > ADM file.  I feel like I'm doing it wrong.  Thanks.
> > >
> > >
> > >
> > >
> > > On Mon, Mar 24, 2008 at 6:53 PM, Nelson, Jamie R
> > > <Jamie.Nelson@xxxxxxxxxxxxxxxxxxx> wrote:
> > > > When viewing administrative templates that contain "preference"
> > > > settings, you must uncheck the "Only show policy settings that can be
> > > > fully managed" checkbox under View > Filtering in the Group Policy
> > > > editor.
> > > >
> > > > Jamie Nelson | Systems Engineer | Systems Support, Information
> > > > Technology | I N T E G R I S Health | Phone 405.552.0903 | Fax
> > > > 405.553.5687 | http://www.integrisok.com
> > > >
> > > >
> > > > -----Original Message-----
> > > > From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx]
> > > > On Behalf Of Sunshine Baines
> > > > Sent: Monday, March 24, 2008 4:44 PM
> > > > To: gptalk@xxxxxxxxxxxxx
> > > > Subject: [gptalk] Registry to ADM
> > > >
> > > > Today I was playing around with the regtoadm tool that came with NUTS.
> > > >  I entered all my information in the registry file that I needed
> > > > before converting it to ADM with the tool.  I imported the ADM file
> > > > with GPMC in the Administrative Templates under computer configuration
> > > > and only one registry entry seemed to work.  The others were just
> > > > folders containing nothing.  Does anyone know what I might be doing
> > > > wrong with the tool?
> > > >
> > > > Thanks,
> > > > Sunshine
> > > > ***********************
> > > > You can unsubscribe from gptalk by sending email to
> > > > gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
> OR
> > > > by logging into the freelists.org Web interface. Archives for the list
> > > > are available at http://www.freelists.org/archives/gptalk/
> > > > ************************
> > > > ***********************
> > > > You can unsubscribe from gptalk by sending email to
> > gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR by
> > logging into the freelists.org Web interface. Archives for the list are
> > available at http://www.freelists.org/archives/gptalk/
> > > > ************************
> > > >
> > >
> > ***********************
> > You can unsubscribe from gptalk by sending email to
> > gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR by
> > logging into the freelists.org Web interface. Archives for the list are
> > available at http://www.freelists.org/archives/gptalk/
> > ************************
> >
> > ***********************
> > You can unsubscribe from gptalk by sending email to
> gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR by
> logging into the freelists.org Web interface. Archives for the list are
> available at http://www.freelists.org/archives/gptalk/
>
> > ************************
> >
> ***********************
> You can unsubscribe from gptalk by sending email to
> gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR by
> logging into the freelists.org Web interface. Archives for the list are
> available at http://www.freelists.org/archives/gptalk/
> ************************
>
> ***********************
> You can unsubscribe from gptalk by sending email to 
> gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR by 
> logging into the freelists.org Web interface. Archives for the list are 
> available at http://www.freelists.org/archives/gptalk/
> ************************
>

Other related posts: