[gptalk] Re: Registry to ADM

  • From: "Darren Mar-Elia" <darren@xxxxxxxxxx>
  • To: <gptalk@xxxxxxxxxxxxx>
  • Date: Mon, 24 Mar 2008 18:09:14 -0700

Try replacing "Numeric" in that policy with the following:

VALUEON NUMERIC 1
VALEOFF NUMERIC 0

That will make Enabled 1 and Disabled 0.

Darren

-----Original Message-----
From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx] On
Behalf Of Sunshine Baines
Sent: Monday, March 24, 2008 5:57 PM
To: gptalk@xxxxxxxxxxxxx
Subject: [gptalk] Re: Registry to ADM

When I disable mine it deletes it from the registry.

On Mon, Mar 24, 2008 at 8:43 PM, Darren Mar-Elia <darren@xxxxxxxxxx> wrote:
> For any numeric policies, unless you specify otherwise in the ADM,
enabling
> the policy sets it to 1 and disabling it sets it to 0.
>
> Darren
>
> -----Original Message-----
> From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx] On
> Behalf Of Sunshine Baines
> Sent: Monday, March 24, 2008 5:34 PM
> To: gptalk@xxxxxxxxxxxxx
>
> Subject: [gptalk] Re: Registry to ADM
>
> Ok I think I got it working, but it will not let me choos a value of 0
> and autmatically sets it to 1.  What exactly am I missing in my ADM,
> so I can enter 0 in my group policy setting.
>
> On Mon, Mar 24, 2008 at 6:58 PM, Sunshine Baines
> <sunshine.baines@xxxxxxxxx> wrote:
> > Thanks for the repsonse.  Can you tak a look at my registry file and
> > ADM file.  I feel like I'm doing it wrong.  Thanks.
> >
> >
> >
> >
> > On Mon, Mar 24, 2008 at 6:53 PM, Nelson, Jamie R
> > <Jamie.Nelson@xxxxxxxxxxxxxxxxxxx> wrote:
> > > When viewing administrative templates that contain "preference"
> > > settings, you must uncheck the "Only show policy settings that can be
> > > fully managed" checkbox under View > Filtering in the Group Policy
> > > editor.
> > >
> > > Jamie Nelson | Systems Engineer | Systems Support, Information
> > > Technology | I N T E G R I S Health | Phone 405.552.0903 | Fax
> > > 405.553.5687 | http://www.integrisok.com
> > >
> > >
> > > -----Original Message-----
> > > From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx]
> > > On Behalf Of Sunshine Baines
> > > Sent: Monday, March 24, 2008 4:44 PM
> > > To: gptalk@xxxxxxxxxxxxx
> > > Subject: [gptalk] Registry to ADM
> > >
> > > Today I was playing around with the regtoadm tool that came with NUTS.
> > >  I entered all my information in the registry file that I needed
> > > before converting it to ADM with the tool.  I imported the ADM file
> > > with GPMC in the Administrative Templates under computer configuration
> > > and only one registry entry seemed to work.  The others were just
> > > folders containing nothing.  Does anyone know what I might be doing
> > > wrong with the tool?
> > >
> > > Thanks,
> > > Sunshine
> > > ***********************
> > > You can unsubscribe from gptalk by sending email to
> > > gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
OR
> > > by logging into the freelists.org Web interface. Archives for the list
> > > are available at //www.freelists.org/archives/gptalk/
> > > ************************
> > > ***********************
> > > You can unsubscribe from gptalk by sending email to
> gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR by
> logging into the freelists.org Web interface. Archives for the list are
> available at //www.freelists.org/archives/gptalk/
> > > ************************
> > >
> >
> ***********************
> You can unsubscribe from gptalk by sending email to
> gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR by
> logging into the freelists.org Web interface. Archives for the list are
> available at //www.freelists.org/archives/gptalk/
> ************************
>
> ***********************
> You can unsubscribe from gptalk by sending email to
gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR by
logging into the freelists.org Web interface. Archives for the list are
available at //www.freelists.org/archives/gptalk/

> ************************
>
***********************
You can unsubscribe from gptalk by sending email to
gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR by
logging into the freelists.org Web interface. Archives for the list are
available at //www.freelists.org/archives/gptalk/
************************

***********************
You can unsubscribe from gptalk by sending email to 
gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR by 
logging into the freelists.org Web interface. Archives for the list are 
available at //www.freelists.org/archives/gptalk/
************************

Other related posts: