[gptalk] Re: Problem using SDM software on Windows 2003

David-
Note that there are two versions of the cmdlets--one for running on XP/2003
systems and the other for Vista/2008 systems. So, make sure you have the
correct version installed on your 2003-R2 box, and also make sure you have
GPMC installed wherever the cmdlets are installed.

Darren


-----Original Message-----
From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx] On
Behalf Of Dave Sharples
Sent: Wednesday, October 22, 2008 9:10 AM
To: 'gptalk@xxxxxxxxxxxxx'
Subject: [gptalk] Problem using SDM software on Windows 2003

Hi, installed the freeware from SDM software (version 1.2) and am attempting
to apply a gpo to an OU on a server running Windows 2003 R2.

This statement works fine on my PC but not on the server (tried a few, all
do the same)

PS C:\Program Files\SDM Software\SDM Software GPMC Cmdlets> Add-SDMgplink
-name "Test Policy" -Scope "OU=XP, OU=Test OUs, DC=testdom, DC=com"
-location 1

Add-SDMgplink : Retrieving the COM class factory for component with CLSID
{F5694708-88FE-4B35-BABF-E56162D5FBC8} failed due to the following error:
80040154.
At line:1 char:14
+ Add-SDMgplink  <<<< -name "Test Policy" -Scope "OU=XP, OU=Test OUs,
DC=testdom, DC=com"

Other powersheel scripts work which query the AD, but any SDM cmdlet fails

Anyone have any ideas?

Thanks
***********************
You can unsubscribe from gptalk by sending email to
gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR by
logging into the freelists.org Web interface. Archives for the list are
available at http://www.freelists.org/archives/gptalk/
************************

***********************
You can unsubscribe from gptalk by sending email to 
gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR by 
logging into the freelists.org Web interface. Archives for the list are 
available at http://www.freelists.org/archives/gptalk/
************************

Other related posts: