[gptalk] Re: Perplexing Logon script issue

  • From: "Darren Mar-Elia" <darren@xxxxxxxxxx>
  • To: <gptalk@xxxxxxxxxxxxx>
  • Date: Tue, 31 Oct 2006 14:32:57 -0800

Also, you might want to just do a net use o: /d |echo y at the beginning of
your logon script just to get rid of that mapping. Mappings are not supposed
to persist unless you tell them too but I've seen inconsistent results with
this.

Darren 

-----Original Message-----
From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx] On
Behalf Of Nelson, Jamie R Contr OC-ALC/ITMA
Sent: Tuesday, October 31, 2006 2:25 PM
To: 'gptalk@xxxxxxxxxxxxx'
Subject: [gptalk] Re: Perplexing Logon script issue

What are you using to map your drives? Batch or Windows Script Host (VBS,
Jscript)?

//signed//
Jamie R Nelson
Systems Engineer / Analyst
Ingenium Corporation
OC-ALC/ITMA
405.739.2811 (DSN 339)

-----Original Message-----
From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx] On
Behalf Of Washington, Booker
Sent: Tuesday, October 31, 2006 4:23 PM
To: gptalk@xxxxxxxxxxxxx
Subject: [gptalk] Perplexing Logon script issue

I have a logon script setup for a group of users.

Initially, I made a mistake and had a mapped drive going to a wrongly named
share

i.e, it was going to \\servername\hiddenshares$


it was suppose to go to \\servername\hiddenshare$


the mapped drive letter was O

I change the script to point to the correct location, but my users still
keep getting O going to the first wrongly named share


It's almost as if the logon is being cached and it keeps holding on to the
old mapping.

Any ideas as to why this would occur.


I have the logon policy set to wait for the network before applying policy,
but they just don't seem to be getting the policy.  But all of the rsop and
modeling tests say that it IS getting the policy..

Signed.... so confused

:)



***********************
You can unsubscribe from gptalk by sending email to
gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR by
logging into the freelists.org Web interface. Archives for the list are
available at http://www.freelists.org/archives/gptalk/
************************
***********************
You can unsubscribe from gptalk by sending email to
gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR by
logging into the freelists.org Web interface. Archives for the list are
available at http://www.freelists.org/archives/gptalk/
************************

***********************
You can unsubscribe from gptalk by sending email to 
gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR by 
logging into the freelists.org Web interface. Archives for the list are 
available at http://www.freelists.org/archives/gptalk/
************************

Other related posts: