[gptalk] Re: New Dells Not Installing Software

  • From: Darren Mar-Elia <darren@xxxxxxxxxx>
  • To: gptalk@xxxxxxxxxxxxx
  • Date: Thu, 10 May 2007 18:51:09 -0800

Steve-
Have you seen http://support.microsoft.com/default.aspx?scid=kb;en-us;840669

And tried using the GpNetworkStartTimeoutPolicyValue reg value?

Darren

-----Original message-----
From: "Steve Evans" scevans@xxxxxxxxxxx
Date: Thu, 10 May 2007 18:31:11 -0400
To: gptalk@xxxxxxxxxxxxx
Subject: [gptalk] Re: New Dells Not Installing Software

> I?ve set ?Always wait for the network at computer startup and > logon? to
> enabled.
> 
> I've set "DisableDHCPMediaSense" to 1.
> 
> No dice on either of them.  Any other ideas?
> 
> 
> Steve Evans
> 
> 
> From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx] > On
> Behalf Of Nelson, Jamie R Contr 72 CS/SCBAF
> Sent: Thursday, May 10, 2007 11:19 AM
> To: gptalk@xxxxxxxxxxxxx
> Subject: [gptalk] Re: New Dells Not Installing Software
> 
> Check out the following articles:
> 
> Cannot connect to domain controller and cannot apply Group Policy with
> Gigabit Ethernet devices
> 
> Group Policy application fails on a computer that is running Windows > 2000,
> Windows XP Service Pack 1, or Windows XP Service Pack
> 
> Description of the Windows XP Professional Fast Logon Optimization > feature
> 
> Fast Logon Optimization is most likely your problem.
> 
> 
> //signed//
> Jamie R Nelson
> Systems Engineer
> Ingenium Corporation
> 
> 
> -----Original Message-----
> From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx] > On
> Behalf Of Steve Evans
> Sent: Thursday, May 10, 2007 11:49 AM
> To: gptalk@xxxxxxxxxxxxx
> Subject: [gptalk] New Dells Not Installing Software
> 
> I'm trying to push software to our terminal servers via GPO.  Our > latest
> batch of Dell's are failing at this.  At bottom we get 1053 errors > from
> Userenv.
> 
> Windows cannot determine the user or computer name. (The specified > domain
> either does not exist or could not be contacted. ). Group Policy > processing
> aborted.
> 
> The computer and user policies are taking effect though, and refresh
> properly after boot-up and/or logon.  It's only during the boot up > process
> that we're unable to access GPO's.
> 
> We've run into this before but updating the NIC drivers fixed it.  > I've done
> the same on these (Dell 2950's Broadcomm NetXtreme II) but no improved
> results.
> 
> Any ideas on what could be going on?
> 
> 
> Steve Evans
> 
> 
> 
> 
> ***********************
> You can unsubscribe from gptalk by sending email to
> gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR > by
> logging into the freelists.org Web interface. Archives for the list are
> available at http://www.freelists.org/archives/gptalk/
> ************************
> 
> ***********************
> You can unsubscribe from gptalk by sending email to 
> gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR by 
> logging into the freelists.org Web interface. Archives for the list are 
> available at http://www.freelists.org/archives/gptalk/
> ************************

***********************
You can unsubscribe from gptalk by sending email to 
gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR by 
logging into the freelists.org Web interface. Archives for the list are 
available at http://www.freelists.org/archives/gptalk/
************************

Other related posts: