[gptalk] Re: New Dells Not Installing Software
- From: "Steve Evans" <scevans@xxxxxxxxxxx>
- To: <gptalk@xxxxxxxxxxxxx>
- Date: Fri, 11 May 2007 23:04:55 -0700
I entered that registry value, and the results are the same.
Steve Evans
-----Original Message-----
From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx] On
Behalf Of Darren Mar-Elia
Sent: Friday, May 11, 2007 5:01 PM
To: gptalk@xxxxxxxxxxxxx
Subject: [gptalk] Re: New Dells Not Installing Software
Also, Steve is this 2003 or 2003, SP1? If pre-SP1 there was this different
fix for this issue:
http://support.microsoft.com/default.aspx?scid=kb;en-us;842804
I am not 100% sure that the other fix applies to 2003, SP1 since its not
listed in the Supported list for that KB.
Steve maybe you should try the reg value list in the KB I just posted above
on your 2003 server. Maybe it is just different on 2003.
Darren
-----Original message-----
From: "Nelson, Jamie R Contr 72 CS/SCBAF" Jamie.Nelson.ctr@xxxxxxxxxxxxx
Date: Fri, 11 May 2007 14:45:22 -0400
To: gptalk@xxxxxxxxxxxxx
Subject: [gptalk] Re: New Dells Not Installing Software
> Strange...maybe that setting doesn't affect Windows 2003 Server. I could
> have sworn it did. Can anyone confirm/deny that?
>
> One thing you might try is assign a computer startup script to that
> server that creates a text file or something simple. Then reboot it and
> see if that script actually runs against the server. That would at least
> help determine whether it is a network race condition or actually
> something with Software Installation policy.
>
> //signed//
> Jamie R Nelson
> Systems Engineer
> Ingenium Corporation
> 72 CS/SCBAF
> 405.739.2811 (DSN 339)
>
>
> -----Original Message-----
> From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx]
> On Behalf Of Steve Evans
> Sent: Friday, May 11, 2007 12:24 PM
> To: gptalk@xxxxxxxxxxxxx
> Subject: [gptalk] Re: New Dells Not Installing Software
>
> I just upped it from 180 to 300. My understanding is that would pause
> the
> boot-up process for 5 minutes (or until it get's a network link). I get
> to
> the logon prompt within 5 minutes easily. So it appears to not be
> pausing
> the boot-up process.
>
>
> Steve Evans
>
>
>
> -----Original Message-----
> From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx]
> On
> Behalf Of Nelson, Jamie R Contr 72 CS/SCBAF
> Sent: Friday, May 11, 2007 6:39 AM
> To: gptalk@xxxxxxxxxxxxx
> Subject: [gptalk] Re: New Dells Not Installing Software
>
> Strange, usually one of those three things fixes those kinds of issues.
> When you used the GpNetworkStartTimeoutPolicyValue setting, what did you
> set the timeout to? 60 seconds?
>
> ...You might try increasing to something larger, say 300 seconds, and
> see if that works. If it does then gradually decrease it until you find
> a reasonable setting that works.
>
> //signed//
> Jamie R Nelson
> Systems Engineer
> Ingenium Corporation
>
> -----Original Message-----
> From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx]
> On Behalf Of Steve Evans
> Sent: Thursday, May 10, 2007 6:21 PM
> To: gptalk@xxxxxxxxxxxxx
> Subject: [gptalk] Re: New Dells Not Installing Software
>
> I knew I forgot one. I did try that with no success. I used the
> Windows XP
> SP2 instructions, even though this is a Win2k3 SP1 box.
>
>
> Steve Evans
>
>
>
> -----Original Message-----
> From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx]
> On
> Behalf Of Darren Mar-Elia
> Sent: Thursday, May 10, 2007 7:51 PM
> To: gptalk@xxxxxxxxxxxxx
> Subject: [gptalk] Re: New Dells Not Installing Software
>
> Steve-
> Have you seen
> http://support.microsoft.com/default.aspx?scid=kb;en-us;840669
>
> And tried using the GpNetworkStartTimeoutPolicyValue reg value?
>
> Darren
>
> -----Original message-----
> From: "Steve Evans" scevans@xxxxxxxxxxx
> Date: Thu, 10 May 2007 18:31:11 -0400
> To: gptalk@xxxxxxxxxxxxx
> Subject: [gptalk] Re: New Dells Not Installing Software
>
> > Ive set Always wait for the network at computer startup and > > logon
> to
> > enabled.
> >
> > I've set "DisableDHCPMediaSense" to 1.
> >
> > No dice on either of them. Any other ideas?
> >
> >
> > Steve Evans
> >
> >
> > From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx]
> >
> On
> > Behalf Of Nelson, Jamie R Contr 72 CS/SCBAF
> > Sent: Thursday, May 10, 2007 11:19 AM
> > To: gptalk@xxxxxxxxxxxxx
> > Subject: [gptalk] Re: New Dells Not Installing Software
> >
> > Check out the following articles:
> >
> > Cannot connect to domain controller and cannot apply Group Policy with
> > Gigabit Ethernet devices
> >
> > Group Policy application fails on a computer that is running Windows >
> 2000,
> > Windows XP Service Pack 1, or Windows XP Service Pack
> >
> > Description of the Windows XP Professional Fast Logon Optimization >
> feature
> >
> > Fast Logon Optimization is most likely your problem.
> >
> >
> > //signed//
> > Jamie R Nelson
> > Systems Engineer
> > Ingenium Corporation
> >
> >
> > -----Original Message-----
> > From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx]
> >
> On
> > Behalf Of Steve Evans
> > Sent: Thursday, May 10, 2007 11:49 AM
> > To: gptalk@xxxxxxxxxxxxx
> > Subject: [gptalk] New Dells Not Installing Software
> >
> > I'm trying to push software to our terminal servers via GPO. Our >
> latest
> > batch of Dell's are failing at this. At bottom we get 1053 errors >
> from
> > Userenv.
> >
> > Windows cannot determine the user or computer name. (The specified >
> domain
> > either does not exist or could not be contacted. ). Group Policy >
> processing
> > aborted.
> >
> > The computer and user policies are taking effect though, and refresh
> > properly after boot-up and/or logon. It's only during the boot up >
> process
> > that we're unable to access GPO's.
> >
> > We've run into this before but updating the NIC drivers fixed it. >
> I've
> done
> > the same on these (Dell 2950's Broadcomm NetXtreme II) but no improved
> > results.
> >
> > Any ideas on what could be going on?
> >
> >
> > Steve Evans
> >
> >
> >
> >
> > ***********************
> > You can unsubscribe from gptalk by sending email to
> > gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
> OR >
> by
> > logging into the freelists.org Web interface. Archives for the list
> are
> > available at //www.freelists.org/archives/gptalk/
> > ************************
> >
> > ***********************
> > You can unsubscribe from gptalk by sending email to
> gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR
> by
> logging into the freelists.org Web interface. Archives for the list are
> available at //www.freelists.org/archives/gptalk/
>
> > ************************
>
> ***********************
> You can unsubscribe from gptalk by sending email to
> gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR
> by
> logging into the freelists.org Web interface. Archives for the list are
> available at //www.freelists.org/archives/gptalk/
> ************************
>
> ***********************
> You can unsubscribe from gptalk by sending email to
> gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR
> by logging into the freelists.org Web interface. Archives for the list
> are available at //www.freelists.org/archives/gptalk/
> ************************
> ***********************
> You can unsubscribe from gptalk by sending email to
> gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR
> by
> logging into the freelists.org Web interface. Archives for the list are
> available at //www.freelists.org/archives/gptalk/
> ************************
>
> ***********************
> You can unsubscribe from gptalk by sending email to
> gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR
> by logging into the freelists.org Web interface. Archives for the list
> are available at //www.freelists.org/archives/gptalk/
> ************************
> ***********************
> You can unsubscribe from gptalk by sending email to
gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR by
logging into the freelists.org Web interface. Archives for the list are
available at //www.freelists.org/archives/gptalk/
> ************************
***********************
You can unsubscribe from gptalk by sending email to
gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR by
logging into the freelists.org Web interface. Archives for the list are
available at //www.freelists.org/archives/gptalk/
************************
***********************
You can unsubscribe from gptalk by sending email to
gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR by
logging into the freelists.org Web interface. Archives for the list are
available at //www.freelists.org/archives/gptalk/
************************
Other related posts:
