[gptalk] Re: GPresult oddity

When i run gpresult, i get the results i was expecting.

When I run rsop.msc, I see an exclamation point on the User configuration  link.

When I click on it, it says

Warning!  One or more Group Policy components failed to process their settings. 
 To view the processing details, select the Properties link above and then 
select the Error Information Tab

Under error information, i see the following failure for folder redirection

Friday, December 14, 2007 5:18:28 PM
Folder Redirection failed due to the error listed below and failed to log 
resultant set of policy information.
An unexpected network error occurred.
Additional Information:
Failed to perform redirection of folder My Documents.
The fully expanded paths for the folder could not be determined.
The following error occurred:
An unexpected network error occurred.


Everything else shows success.  My Docs is set to redirect to the Home 
Directory.  TheHome directory shows up.

So, I guess now the question is, is there a way to fix this?







________________________________________
From: gptalk-bounce@xxxxxxxxxxxxx [gptalk-bounce@xxxxxxxxxxxxx] On Behalf Of 
Darren Mar-Elia [darren@xxxxxxxxxx]
Sent: Friday, December 14, 2007 4:19 PM
To: gptalk@xxxxxxxxxxxxx
Subject: [gptalk] Re: GPresult oddity

What happens if you run rsop.msc on that machine?

-----Original Message-----
From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx] On
Behalf Of Booker.Washington@xxxxxxxxxxxxxx
Sent: Friday, December 14, 2007 12:56 PM
To: gptalk@xxxxxxxxxxxxx
Subject: [gptalk] Re: GPresult oddity

But that should be "impossible" in this case.  It is in the same OU as other
computers and no Blocking or blocks on delegation.




Booker T. Washington III
Systems Support Specialist
404-894-8716 direct
404-385-5188 alt


-----Original Message-----
From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx] On
Behalf Of Darren Mar-Elia
Sent: Friday, December 14, 2007 11:32 AM
To: gptalk@xxxxxxxxxxxxx
Subject: [gptalk] Re: GPresult oddity

Sounds like the computer has no RSOP data!

-----Original Message-----
From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx] On
Behalf Of Washington, Booker
Sent: Thursday, December 13, 2007 3:17 PM
To: gptalk@xxxxxxxxxxxxx
Subject: [gptalk] GPresult oddity


I get the following notice/error when I try to use the gpmc to view results:

Failed to connect to Domain\Computername due to the error listed below.
ensure that the Windows Management Instrumentation(WMI) service is enabled
on the target computer, and consult the event log of the target computer for
further details.

Details:
The requested name is valid, but no data of the requested type was found

At this very moment, I can not get to the local computer to check the event
log, but if anyone has any ideas here, I would appreciate the input.





Booker T. Washington III
Systems Support Specialist


***********************
You can unsubscribe from gptalk by sending email to
gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR by
logging into the freelists.org Web interface. Archives for the list are
available at http://www.freelists.org/archives/gptalk/
************************

***********************
You can unsubscribe from gptalk by sending email to
gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR by
logging into the freelists.org Web interface. Archives for the list are
available at http://www.freelists.org/archives/gptalk/
************************
***********************
You can unsubscribe from gptalk by sending email to
gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR by
logging into the freelists.org Web interface. Archives for the list are
available at http://www.freelists.org/archives/gptalk/
************************

***********************
You can unsubscribe from gptalk by sending email to 
gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR by 
logging into the freelists.org Web interface. Archives for the list are 
available at http://www.freelists.org/archives/gptalk/
************************
***********************
You can unsubscribe from gptalk by sending email to 
gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR by 
logging into the freelists.org Web interface. Archives for the list are 
available at http://www.freelists.org/archives/gptalk/
************************

Other related posts: