[gptalk] Re: FW: Change name of registry key
- From: "Nick Smith" <nick@xxxxxxxxxxxxxxxxxx>
- To: <gptalk@xxxxxxxxxxxxx>
- Date: Mon, 2 Apr 2007 08:54:19 +0100
Unless you have a disaster recovery licence server available (Perhaps
off-site) in case your primary goes down, in which case using GPO or
scripting to alert of the change would seem logical.
From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx]
On Behalf Of hans straat
Sent: 01 April 2007 19:48
To: gptalk@xxxxxxxxxxxxx
Subject: [gptalk] Re: FW: Change name of registry key
Like I already said, vbscript is the only way to set variable's and
write it with regwrite to the registry on startup. ADM templates will
not do the job. I also wonder why you want to hardcode the terminal
license server as it uses the discovery process to discover the license
server on the LAN. The only way I can think of is if you have your
license server behind a firewall or in the dmz wich would in both ways a
non logical decission.
regards,
hans straat
ceo www.datacrash.net
________________________________
Subject: [gptalk] Re: FW: Change name of registry key
Date: Fri, 30 Mar 2007 08:16:18 -0500
From: Jamie.Nelson.ctr@xxxxxxxxxxxxx
To: gptalk@xxxxxxxxxxxxx
Yes, VBScript would be the best way to do this. Just pass a parameter to
the script so that you don't have to hard code it in every time. Then
all you have to do is copy the GPO and change the parameter that is
passed.
//signed//
Jamie R Nelson
Systems Engineer
Ingenium Corporation
72 CS/SCBNF
405.739.2811 (DSN 339)
________________________________
From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx]
On Behalf Of Auld Colin
Sent: Friday, March 30, 2007 6:26 AM
To: 'gptalk@xxxxxxxxxxxxx'
Subject: [gptalk] Re: FW: Change name of registry key
It's not really dynamic, but could you use an environment variable /
startup script to define the licence server name in the key?
e.g. set LICSRV via TS startup script then set ADM to write key as
KEYNAME
"SYSTEM\CurrentControlSet\Services\TermService\Parameters\LicenseServers
\%LICSRV%"
________________________________
From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx]
On Behalf Of Darren Mar-Elia
Sent: 30 March 2007 04:24
To: gptalk@xxxxxxxxxxxxx
Subject: [gptalk] Re: FW: Change name of registry key
This has been asked before and I know of no way to change key names
using ADM syntax. Perhaps some of the brighter ADM folks on this list
have an idea.
From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx]
On Behalf Of Tony Murray [HIQ]
Sent: Thursday, March 29, 2007 7:29 PM
To: gptalk@xxxxxxxxxxxxx
Subject: [gptalk] FW: Change name of registry key
Hi all
Any thoughts on the question below?
Thanks
Tony
From: <Name removed to protect the innocent>
Sent: Friday, 30 March 2007 12:59
To: Tony Murray
Subject: gpo
Hi Tony, as discussed, I would like GP to create a registry key and to
have the ability to change the name of the key...This way we can just
copy the policy and enter the new license server if a new customer or
the license server needs to be changed for DR..etc
Unfortunately W2K3 uses keys as opposed to reg_sz values that W2K uses
for specifying license servers.
I haven't been able to find a way to get GP to allow me to dynamically
change a key name in the same way that you can a value.
Example below...server name needs to be dynamic...hope this makes
sense....thanks
CLASS MACHINE
CATEGORY
"SYSTEM\CurrentControlSet\Services\TermService\Parameters\LicenseServers
\WN0NTLICTS01"
KEYNAME
"SYSTEM\CurrentControlSet\Services\TermService\Parameters\LicenseServers
\WN0NTLICTS01"
END CATEGORY
________________________________
This email or attachment(s) may contain confidential or legally
privileged information intended for the sole use of the addressee(s).
Any use, redistribution, disclosure, or reproduction of this message,
except as intended, is prohibited. If you received this email in error,
please notify the sender and remove all copies of the message, including
any attachments. Any views or opinions expressed in this email (unless
otherwise stated) may not represent those of HealthIntelligence (HIQ
Ltd).
http://www.healthintelligence.org.nz
<http://www.healthintelligence.org.nz/>
(1H_S1)
No Viruses were detected in this message.
________________________________
HealthIntelligence <http://www.healthintelligence.org.nz/> eMail Filter
Service
|* This e-mail, and any attachments, is confidential and for the use of
the addressee only.
|* If you are not the intended recipient, please telephone +44 (0) 1506
408700
|* We do not accept legal responsibility for this e-mail or any viruses.
|* All e-mails sent and received by us are monitored.
|* Contracts cannot be concluded with us by e-mail.
|* This message has been sent from a member of the British Energy Group
(the "Group").
|* The parent company of the Group is British Energy Group plc, a
company registered in Scotland, registered number 270184, and having its
registered office at
|* Systems House, Alba Campus, Livingston EH54 7EG
Other related posts:
