[gptalk] Re: Configuring Power Options with GPP

  • From: "Nelson, Jamie R" <Jamie.Nelson@xxxxxxxxxxxxxxxxxxx>
  • To: <gptalk@xxxxxxxxxxxxx>
  • Date: Thu, 22 May 2008 19:16:39 -0500

Yes, XP Power Management is configurable through GPP, and Vista power 
management can be done natively in the Administrative Templates section.

Jamie Nelson | Systems Engineer | Systems Support, Information Technology | I N 
T E G R I S Health | Phone 405.552.0903 | Fax 405.553.5687 | 
http://www.integrisok.com


-----Original Message-----
From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx] On 
Behalf Of sunshine.baines@xxxxxxxxx
Sent: Thursday, May 22, 2008 7:15 PM
To: gptalk@xxxxxxxxxxxxx
Subject: [gptalk] Re: Configuring Power Options with GPP

Pref. Policy?
Sent from my BlackBerry® wireless device from U.S. Cellular

-----Original Message-----
From: "Nelson, Jamie R" <Jamie.Nelson@xxxxxxxxxxxxxxxxxxx>

Date: Thu, 22 May 2008 18:16:51 
To:<gptalk@xxxxxxxxxxxxx>
Subject: [gptalk] Re: Configuring Power Options with GPP


Shouldn't need to. It's built into Group Policy now.

Jamie Nelson | Systems Engineer | Systems Support, Information
Technology | I N T E G R I S Health | Phone 405.552.0903 | Fax
405.553.5687 | http://www.integrisok.com

-----Original Message-----
From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx]
On Behalf Of Sunshine Baines
Sent: Thursday, May 22, 2008 6:15 PM
To: gptalk@xxxxxxxxxxxxx
Subject: [gptalk] Re: Configuring Power Options with GPP

Can you create a custom ADM to do this?


On Thu, May 22, 2008 at 2:51 PM, Nelson, Jamie R
<Jamie.Nelson@xxxxxxxxxxxxxxxxxxx> wrote:
> Hi All,
>
>
>
> Been messing with the Power Options in GPP and am running into a
problem.
> I've used the same settings (in PolicyMaker) to do basic power
management
> before but haven't run into this issue.
>
>
>
> I have a GPO at the top of my hierarchy where I have configured both
the
> computer and user side of the GPO to set the active Power Scheme to
"Always
> On". Further down on a sub OU containing user objects, I have
configured
> just the USER side to set the scheme to "Presentation". Now here is
the
> weird part; immediately after logging on with a user account in the
sub OU,
> the Power Scheme is set to "Presentation" as I have desired it to.
However,
> when the background policy refresh occurs it is getting set back to
"Always
> On" for some reason.
>
>
>
> When I do an GP Results Wizard query, the user side settings from both
GPOs
> are present with a message stating:
>
>
>
>                 "The following settings have applied to this object.
Within
> this category, settings nearest the top of the report are the
prevailing
> settings when resolving conflicts."
>
>
>
> "Always On" is listed first but I don't understand where that priority
is
> being set since the "Presentation" scheme is being set in a GPO with
higher
> precedence.
>
>
>
> With the EZ GPO tool from the EPA, anything you configured on the
computer
> side only applied when no user was logged on to the machine. User side
> policy only affected logged on users. Does this same concept apply to
GPP?
> If not, I guess I don't understand GPP Power Options as well as I
thought I
> did. J Someone care to explain the difference between configuring
schemes on
> the computer side vs. the user side? What kind of behavior is to be
expected
> when schemes are configured for both?
>
>
>
> Regards,
>
>
>
> Jamie Nelson | Systems Engineer | Systems Support, Information
Technology |
> I N T E G R I S Health | Phone 405.552.0903 | Fax 405.553.5687 |
> http://www.integrisok.com
>
>
>
>________________________________
> This e-mail may contain identifiable health information that is
subject to
> protection under state and federal law. This information is intended
to be
> for the use of the individual named above. If you are not the intended
> recipient, be aware that any disclosure, copying, distribution or use
of the
> contents of this information is prohibited and may be punishable by
law. If
> you have received this electronic transmission in error, please notify
us
> immediately by electronic mail (reply).
***********************
You can unsubscribe from gptalk by sending email to
gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR
by logging into the freelists.org Web interface. Archives for the list
are available at http://www.freelists.org/archives/gptalk/
************************


This e-mail may contain identifiable health information that is subject to 
protection under state and federal law. This information is intended to be for 
the use of the individual named above. If you are not the intended recipient, 
be aware that any disclosure, copying, distribution or use of the contents of 
this information is prohibited and may be punishable by law. If you have 
received this electronic transmission in error, please notify us immediately by 
electronic mail (reply).
***********************
You can unsubscribe from gptalk by sending email to 
gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR by 
logging into the freelists.org Web interface. Archives for the list are 
available at http://www.freelists.org/archives/gptalk/
************************
b‹j{²ær¸yúš
jYÊÇv)zf–Ú¦Ö’·¹ë~·–+²ŠÂ+º{nlj·žØJæyˉé9–ˆŠxžÚ…çyé²Û®n)z·qàrzǮؖ+j·½¨i¹jضŸÃ
­çŠË¢¸j·Š÷þ
jY


This e-mail may contain identifiable health information that is subject to 
protection under state and federal law. This information is intended to be for 
the use of the individual named above. If you are not the intended recipient, 
be aware that any disclosure, copying, distribution or use of the contents of 
this information is prohibited and may be punishable by law. If you have 
received this electronic transmission in error, please notify us immediately by 
electronic mail (reply).

Other related posts: