[gps-talkusers] setting starting positions

Danny,

There is a lot to cover with regard to setting a starting position and I 
encourage you to read the manual and audio tutorial.

There are 5 ways to set a starting position. There are starting positions 
for either GPS or Virtual modes.

1. In Virtual mode, you can set a starting position by moving around 
manually on the maps.
2. You can set a starting position by address using Chord S.
3. You can search the POI database and choose a POI as a starting or ending 
point.
4. You can even open a route and set one of the waypoints as a starting 
position.
5. You can set your virtual position to your GPS position and use that as a 
starting point.

In GPS mode, your GPS position is your starting point. If the receiver is 
off, the last GPS position used will be retained as your GPS starting position.

Mike




Michael G. May


CEO Sendero Group

Developers and distributors of BrailleNote GPS
Now distributing BrailleNote, VoiceNote, Miniguide, The Tissot Silen-T 
tactile watch and the ID Mate, bar code reader

MikeMay@xxxxxxxxxxxxxxxx
http://www.SenderoGroup.com

(530) 757-6800, Fax (530) 757-6830, Mobile (530) 304-0007
Sendero Group, LLC
1118 Maple Lane, Davis, CA 95616-1723, USA

Latitude, 38 33 9.239 North
Longitude, 121 45 40.145 West

Other related posts: