[gps-talkusers] Re: potential feature

Kevin,
What I am asking about is the possibility of entering the name of a known 
cross street or a previously created user poi or a commercial poi as an 
alternative to the address after entering the city and street name while 
setting an address. Sometimes I have no idea of the exact adress, but I do 
know a cross street.

let all be harmonious, sympathetic, brotherly, kindhearted, and humble in 
spirit; not returning evil for evil or insult for insult, but giving
a blessing instead; for you were called for the very purpose that you might 
inherit a blessing." (I Peter 3: 7-9)
-----
----- Original Message ----- 
From: "Kevin Chao" <g.unit89@xxxxxxxxxxxxx>
To: <gps-talkusers@xxxxxxxxxxxxx>
Sent: Monday, May 21, 2007 5:35 PM
Subject: [gps-talkusers] Re: potential feature


: Sheila,
:
: Both of these are currently possible.
:
: If you are wanting to set a poi as either your destination or virtual
: position; you can do the following:
: 1. stand at the spot you are wanting to mmake a poi, make sure you have a
: gps fix
: 2. on the bt press space with dot 3 and on the qt press control with r; 
type
: in the name for that location, and if you want to add details, just put in 
a
: comma (for example, home, 555 north thornton rd); the information after 
the
: comma will only be presented if you expand the poi by pressing 
space/control
: p
: 3. press enter to confirm the poi name/details
: 4. in the future you will be able to find this poi by doing space/control 
f
: and accepting all/user for the category
: 5. for the search string, type in home if you are using the example above 
or
: whatever you might be looking for
: 6.  press space/control d to set the poi as your destination or
: space/control v to set it as your virtual position.
:
: I hope the above mmade sense and wasn't too way out there. the / denote
: either bt/qt commands or choosing either one of two items  as in all/user.
:
: entering cross street
: This is also currently possible. When you are presented with the street 
name
: field, type in the street name you want, either one will do. when you are
: presented with the next field, address number, press enter and a list of
: cross streets will be brought up. You can then define it as your
: destination, poi, or virtual
:
: I hope this helps.
:
: Kevin
:
: ----- Original Message ----- 
: From: "Sheila Killian" <
: sheila-k@xxxxxxxxxxxxx>
: To: <
: gps-talkusers@xxxxxxxxxxxxx>
: Sent: Monday, May 21, 2007 12:15 PM
: Subject: [gps-talkusers] Re: question about a potential feature
:
: > Here is a feature that would be most helpful to me. I would like, if it 
is
: > possible,  to be able while setting address to have the option of 
locating
: > a
: > poi and using this rather than a street address. For example, instead of
: > writing my home address all the time I could enter the user poi I have
: > previously created. Also, having the option to enter a cross street
: > instead
: > of the actual address would make defining a position easier to set in 
less
: > familiar places.  Are either of these features possible?
: > Sheila
: > let all be harmonious, sympathetic, brotherly, kindhearted, and humble 
in
: > spirit; not returning evil for evil or insult for insult, but giving
: > a blessing instead; for you were called for the very purpose that you
: > might
: > inherit a blessing." (I Peter 3: 7-9)
: >
: >
:
:
:
:

Other related posts: