[gps-talkusers] Re: my experiences with trains

is this in version 4.22?
----- Original Message ----- From: "Brett" <brettsta21@xxxxxxxxx> 
To: <gps-talkusers@xxxxxxxxxxxxx>
Sent: Monday, March 30, 2009 9:49 PM
Subject: [gps-talkusers] Re: my experiences with trains



Hi Zack,
I don't think that the point. If streets are close enough to the railway, Sendero will think your on them, but this isn't really practical use when on a train. However, setting your GPS to only announce the Transportation category will alert you to the train stop your approaching, if you want that much information. Other wise, just set the destination to the stop prior to the one you need and turn off all other notifications and you will get an alert when you need to get off. These are two practical ways to use GPS on a train. 

Cheers,
Brett.
----- Original Message ----- From: "Zach D" <chickerland@xxxxxxxxx> 
To: <gps-talkusers@xxxxxxxxxxxxx>
Sent: Tuesday, March 31, 2009 11:51 AM
Subject: [gps-talkusers] my experiences with trains



Hello fellow list members,
I just got off a railroad in the Albuquerque, NM area. I wanted to share my experiences with you regarding the previous weeks talk about using GPS on railroads. Basically, what I think: The GPS turned out accurate half of the time; the other half it still showed that I was on neighboring streets or near "unnamed." I even recorded some of the route with the Mpower, but it was not as clear as I hoped it to be. 

Have a good rest of the week

Other related posts: