[gps-talkusers] Re: exiting the exit

Carl, 

I have found that personally this is something that works at the moment. If you 
have a route open and you accidentally close it by either hitting escape, 
space/control e/z then you can revert the operation by hitting the same 
keystroke. The only place that I have found this not to work is when the user 
is trying to go directly to the main menu or use the task switch functionality. 

So, there are some hidden features.  

Kevin 
  ----- Original Message ----- 
  From: Carl Simmons 
  To: gps-talkusers@xxxxxxxxxxxxx 
  Sent: Saturday, January 20, 2007 1:54 PM
  Subject: [gps-talkusers] Re: exiting the exit


  Kevin,

   

  I have just double checked and this issue has been submitted as a new feature 
request for a new release.

   

  Carl


------------------------------------------------------------------------------

  From: gps-talkusers-bounce@xxxxxxxxxxxxx 
[mailto:gps-talkusers-bounce@xxxxxxxxxxxxx] On Behalf Of Kevin Chao
  Sent: Saturday, January 20, 2007 1:27 PM
  To: gps-talkusers@xxxxxxxxxxxxx
  Subject: [gps-talkusers] exiting the exit

   

  I have found that after accidentally closing a number of routes that were in 
progress by accidentally hitting space with e a little too many times and 
having to go back into the GPS program and recreate the entire route, this was 
fine with those shorter routes, but became time consuming with those routes 
that are longer than 20 miles. I figured there must be a way of exiting the 
exit. Well, if it ask do you wish to save the route, you can either hit space 
with e (control with e), space with z (control with z), or on a QT the escape 
key. 

   

  Kevin

Other related posts: