[gps-talkusers] Re: e: Using gps and bt printer (not simultaneously)

Robert, 

How much does a blue tooth adapter cost? Where can you buy it? Thanks. 

Sue Mangis 

-----Original Message-----
From: gps-talkusers-bounce@xxxxxxxxxxxxx
[mailto:gps-talkusers-bounce@xxxxxxxxxxxxx] On Behalf Of robert stigile
Sent: Monday, April 23, 2007 5:40 PM
To: gps-talkusers@xxxxxxxxxxxxx
Subject: [gps-talkusers] e: Using gps and bt printer (not simultaneously)

Hello Sue,
I use the Bluetooth adapter on the embosser.
I have had no problems with using the gps and then going to the 
bluetooth for the embosser.
I usually have to search for the Bt and choose printer, then I am 
good to go.
When I want to use the gps, I just make sure the receiver is 
active and I am good to go.
Hope this helps,

Robert Stigile


> ----- Original Message -----
>From: "Sue Sweetman" <sue.sweetman@xxxxxxx
>To: <gps-talkusers@xxxxxxxxxxxxx
>Date sent: Mon, 23 Apr 2007 17:24:47 -0700
>Subject: [gps-talkusers] Using gps and bt printer (not 
simultaneously)

>I was asked to respond to a friend who heard that BN GPS users 
have
>difficulty using bluetooth printers, possibly because they also 
use another
>bluetooth device, i.e., the gps receiver.  (We know that you 
cannot use both
>the receiver and the printer simultaneously.)  I have not heard 
of this
>problem, but I want to give them an accurate answer.  Can anyone 
respond
>with input regarding any problems you've had in this area?  Or if 
you use
>both gps and a bluetooth printer successfully, can you tell me 
what printer
>you are using?
>Much thanks,
>Sue Sweetman

Other related posts: