[gps-talkusers] e: Using gps and bt printer (not simultaneously)

Hello Sue,
I use the Bluetooth adapter on the embosser.
I have had no problems with using the gps and then going to the bluetooth for the embosser. I usually have to search for the Bt and choose printer, then I am good to go. When I want to use the gps, I just make sure the receiver is active and I am good to go. 
Hope this helps,

Robert Stigile



----- Original Message -----
From: "Sue Sweetman" <sue.sweetman@xxxxxxx
To: <gps-talkusers@xxxxxxxxxxxxx
Date sent: Mon, 23 Apr 2007 17:24:47 -0700
Subject: [gps-talkusers] Using gps and bt printer (not 
simultaneously)
I was asked to respond to a friend who heard that BN GPS users 
have
difficulty using bluetooth printers, possibly because they also 
use another
bluetooth device, i.e., the gps receiver. (We know that you 
cannot use both
the receiver and the printer simultaneously.) I have not heard 
of this
problem, but I want to give them an accurate answer. Can anyone 
respond
with input regarding any problems you've had in this area? Or if 
you use
both gps and a bluetooth printer successfully, can you tell me 
what printer

you are using?
Much thanks,
Sue Sweetman

Other related posts: