[gps-talkusers] e: Re: e: Re: e: Using gps and bt printer (not simultaneously)

Hello,
It has two parts.
The part that plugs into the embosser, is a parallel device and has a power supply. The other end is a usb device that goes into the usb port of the computer. I have the Juliet Classic embosser, but the problem is that Enabling stopped selling this device, so you would have to google Bluetake and then look for the BT 200. 
Hope this helps,

Robert Stigile



----- Original Message -----
From: "Roberto Gonzalez" <rgonzalez@xxxxxxxxxxxxxxx
To: <gps-talkusers@xxxxxxxxxxxxx
Date sent: Wed, 25 Apr 2007 12:15:02 -0700
Subject: [gps-talkusers] Re: e: Re: e: Using gps and bt printer 
(not simultaneously)


Robert,
Does the BT200 connect to a serial port or is it a USB device? 
Which

Enabling embosser do you use?  Thanks.




----- Original Message -----
From: "robert stigile" <rstigile@xxxxxxxxxxxxx
To: <gps-talkusers@xxxxxxxxxxxxx
Sent: Monday, April 23, 2007 8:25 PM
Subject: [gps-talkusers] e: Re: e: Using gps and bt printer (not
simultaneously)




Hello,
When I got it the adapter was $80 and I purchased it through 
Enabling

technologies.
They do not sell it anymore.
I would do a search on Google for Bluetooth adapter. You want 
the bt 200

adapter.
Good lumk,



Robert Stigile




----- Original Message -----
From: "Susan Mangis" <susanmangis@xxxxxxxxxxx
To: <gps-talkusers@xxxxxxxxxxxxx
Date sent: Mon, 23 Apr 2007 19:42:25 -0700
Subject: [gps-talkusers] Re: e: Using gps and bt printer (not

simultaneously)



Robert,



How much does a blue tooth adapter cost? Where can you buy it?

Thanks.



Sue Mangis



-----Original Message-----
From: gps-talkusers-bounce@xxxxxxxxxxxxx
[mailto:gps-talkusers-bounce@xxxxxxxxxxxxx] On Behalf Of robert

stigile

Sent: Monday, April 23, 2007 5:40 PM
To: gps-talkusers@xxxxxxxxxxxxx
Subject: [gps-talkusers] e: Using gps and bt printer (not

simultaneously)



Hello Sue,
I use the Bluetooth adapter on the embosser.
I have had no problems with using the gps and then going to the
bluetooth for the embosser.
I usually have to search for the Bt and choose printer, then I am
good to go.
When I want to use the gps, I just make sure the receiver is
active and I am good to go.
Hope this helps,



Robert Stigile




----- Original Message -----
From: "Sue Sweetman" <sue.sweetman@xxxxxxx
To: <gps-talkusers@xxxxxxxxxxxxx
Date sent: Mon, 23 Apr 2007 17:24:47 -0700
Subject: [gps-talkusers] Using gps and bt printer (not

simultaneously)



I was asked to respond to a friend who heard that BN GPS users

have

difficulty using bluetooth printers, possibly because they also

use another

bluetooth device, i.e., the gps receiver.  (We know that you

cannot use both

the receiver and the printer simultaneously.)  I have not heard

of this

problem, but I want to give them an accurate answer.  Can anyone

respond

with input regarding any problems you've had in this area?  Or if

you use

both gps and a bluetooth printer successfully, can you tell me

what printer

you are using?
Much thanks,
Sue Sweetman











__________ NOD32 2215 (20070424) Information __________



This message was checked by NOD32 antivirus system.
http://www.eset.com

Other related posts: