[gps-talkusers] Re: Switching Between GPS and Keyword

Diane,

It is certainly on their radar and has been for some time. Nice nudges 
might help raise it in the priority list for the next release, definitely 
not 6.1.

Mike
At 07:11 PM 1/27/2005, you wrote:
>Hi, Mike!
>
>Thanks for the reply. Is this something that the GPS users need to be 
>asking for from PDI? Do people need to request this to be placed in the 
>software upgrades?
>
>Thanks.
>
>  Diane Garrett/Leader Daisy
>Email: dianegarrett@xxxxxxxxxxxxx
>Phone: (918) 664-5731
>
>
> > ----- Original Message -----
> >From: Michael May <MikeMay@xxxxxxxxxxxxxxxx
> >To: gps-talkusers@xxxxxxxxxxxxx
> >Date: Sun, 23 Jan 2005 14:15:27 -0800
> >Subject: [gps-talkusers] Re: Switching Between GPS and Keyword
>
> >Diane,
>
> >You can use all the hot keys to switch to BrailleNote applications from
> >GPS. However, there is no hot key to switch back to GPS.
>
> >Mike
>
>
> >At 01:24 PM 1/23/2005, you wrote:
> >>Hi, Rich and List!
>
> >>Can you not use the Function with 4 to get to the Keyword document, or
> >>does that interfere with the GPS. I don't know the GPS system so am asking.
>
> >>  Diane Garrett/Leader Daisy
> >>Email: dianegarrett@xxxxxxxxxxxxx
> >>Phone: (918) 664-5731
>
>
> >>> ----- Original Message -----
> >>>From: "Rich Irwin" <rich.irwin@xxxxxxxxxxx
> >>>To: "Gps-Talkusers" <gps-talkusers@xxxxxxxxxxxxx
> >>>Date: Thu, 20 Jan 2005 16:20:20 -0800
> >>>Subject: [gps-talkusers] Switching Between GPS and Keyword
>
> >>>The question is whether one can switch back and forth between GPS mode and
> >>>Keyword?
> >>>Application Example:  I was out with my real estate agent yesterday 
> looking
> >>>at a new residence.  Before we went out, I set the addresses of the three
> >>>places we were going to look at as user pois while in the virtual mode.  I
> >>>also downloaded the multiple listing write ups to the Braille note as a
> >>>Keyword document.  In at least one instance I loaded the user poi of the
> >>>residence as the destination and was guiding the agent to the location..
> >>>While we were traveling, a question came up and I tried to get to the
> >>>document for the answer.  I could use Function with S to switch to the
> >>>Keyword mode, but had to reload the document each time.  When I would 
> switch
> >>>back to the GPS mode, I would have to reload the maps and reset the poi to
> >>>the destination.  It worked but was very frustrating and time 
> consuming.  Is
> >>>there a more direct way, or plans in the new version to have such a 
> feature?
>
> >>>Rich Irwin
> >>>rich.irwin@xxxxxxxxxxx

Other related posts: