[gps-talkusers] Multiple repeat, BT 338 fine

  • From: Michael May <mikemay@xxxxxxxxxxxxxxxx>
  • To: gps-talkusers@xxxxxxxxxxxxx
  • Date: Thu, 01 Sep 2005 08:31:46 -0700

Vicky,

Weather should have little impact on GPS reception.

I have been testing the BT339 and Holux and will soon also have a Fortuna Slim to test. For our UK friends who have tried that receiver, it runs at 38.4 baud so that is why it won't work with the BrailleNote PK. The standard for receivers is 4800 baud. We may add a 38.4 selection if it appears that more than this one receiver are going that route.

One thing to check with these new receivers is their connectivity. I have experienced more drop outs than with the Blue Logger or Garmin receivers. By this I mean that the new receivers I am testing completely disconnect and the PK says Bluetooth not detected or sometimes they just flick to no detection for a second and then reconnect. You can always press G to see the receiver status and with these new receivers, I would do that frequently to test the connectivity.

Mike

At 05:50 AM 9/1/2005, you wrote:
Hi All,

Well, when I tried the BT 338 receiver this morning, it worked just fine with the multiple repeat commands. So, who knows. Either I was doing something wrong before, or the number of satellites and weather conditions made the difference. For, the last time I tried with the BT 338 when it didn't work, I normally got 4 or 5 satellites and it was cloudy, while I got between 8 and 10 satellites today and it was sunny.



Other related posts: