[gps-talkusers] Re: Installing the GPS software on my Braille Note mPower 32

Hi Mike:

Thanks much guy.


----- Original Message ----- From: "Michael May" <mikemay@xxxxxxxxxxxxxxxx>
To: <gps-talkusers@xxxxxxxxxxxxx>
Sent: Thursday, February 16, 2006 1:54 PM
Subject: [gps-talkusers] Re: Installing the GPS software on my Braille Note mPower 32


You must do the three finger reset in the prescribed way. If you don't, you will get the message you mentioned.

Hold down the dots 123 or SDF and keep holding them wile you press and release the Reset button. After about ten seconds, you will hear a chime and you can let them up.

Then you can proceed with the installation.

Mike At 08:09 AM 2/16/2006, you wrote: 
Hi Folks:

When I try to install the GPS software from my Compac Flash card, I receive the following message:

gpstalkobjs.pll. The process cannot access the file because it is being used by another process.

It doesn't appear to be already installed as there is no GPS option in the BrailleNote menu structure.

What do I do from here?

Thanks all over the place gang.





Other related posts: