[gps-talkusers] Re: I have a question

Yes you can.

You need to have the gps software running.  Then you can eather go outside
in frunt of or where ever at your home and when you have a sat fix and the
gps announces where you ar, do the following.  Hit the y key and you should
get a lat and long reading if the gps has a fix on your position.  Then do a
g key to see what sat status is for example it would say something like good
6 sattlelites.  Now get to the spot you wish to mark as your poi and hit
space+ dot 3.  it will ask you to name the poi, give it a name and then do a
space e and it is in your user poi folder.
You can do the address eather with a sat fix or no fix.  If you are in the
house and then do not turn the gps receiver just turn on the gps software.
You will hear gps active loading maps, then no receiver detected hit v for
vertural, so hit a v. now you are in virtual mode.  Hold down the space bar
and do a s.  you hear state name, type in your state and hit enter.  Just
keep filling in the prompts and when it finds your address you can then save
it as a poi by doing a p.

hth

-----Original Message-----
From: gps-talkusers-bounce@xxxxxxxxxxxxx
[mailto:gps-talkusers-bounce@xxxxxxxxxxxxx] On Behalf Of Sarai
Sent: Sunday, July 31, 2005 12:13
To: GPS
Subject: [gps-talkusers] I have a question

Hi,
I've read everything twice and now just have to play with it. I was
wondering if I can set my home as a POI by address. I tried doing space
with s but that didn't work. 

Sarai D. Bucciarelli

Other related posts: