[gps-talkusers] Re: Hollux 1000 receiver question

I would like to just add to what Jim said. 

The purpose of the USB connection on the Holux receiver is to charge the unit. 
The M-1000 takes about 4 hours to charge fully and
the 236 takes about 2 hours, the M-1000 has a battery life about double that of 
the 236, which explains the longer charging time.


For further explanations on pairing and using the GPS receiver, I would consult 
the User Guide or Audio Tutorial entitled,
"03PairingAndInstallingGPS"

The User Guide can be found onboard in the Active Help Menu or at MySendero.com 
along with the Audio Tutorial.

Kevin 



-----Original Message-----
From: gps-talkusers-bounce@xxxxxxxxxxxxx 
[mailto:gps-talkusers-bounce@xxxxxxxxxxxxx] On Behalf Of Jim Gammon
Sent: Friday, December 28, 2007 2:17 AM
To: gps-talkusers@xxxxxxxxxxxxx
Subject: [gps-talkusers] Re: Hollux 1000 receiver question

Hi Albert, you don't connect the M-1000 using a USB cable.  you use Blue 
Tooth
which is wireless.  Go to your options menu and hit the letter C for
connect.  Then, hit letter B for blue tooth.   Now it will say starting
bluetooth.  After a few moments, the unit will ask you if you want to search
for devices.  Hit Y for yes.  After a few moments it will find the Holux
M-1000.  It may also find other devices like your cell phone or computer if
they have bluetooth.  Now you want to pair the Holux receiver  by doing
0000.  Next you will need to activate the receiver.  To do this, go to the
list of bluetooth devices and hit enter on the holux m-1000.  It may say
paired in which case you want to hit A for activate.  Or, it may say paired
and active.  Now go to your gps program and open it.  Hopefully it will find
the M-1000 receiver.
Now I want to make a disclaimer here.  I am only a user.  I use an Mpower BT
not a QT so there may be some differences in the letters you have to use in
order to find and activate your bluetooth receiver.  I am not familiar with
the QT. At any rate this is a start and I am sure you will get much clearer
advice from Kevin, Charles and probably numerous other folks on the list.  I
wouldn't have written but when I read your email, no one else had yet
answered your question.
So, forgive me for leaving out stuff or not splaining it clearly.  It's late
and I am going to sign off.  Good luck!  Jim


----- Original Message ----- 
From: "Albert Sanchez" <albertsanchez@xxxxxxxxxxxxxx>
To: <gps-talkusers@xxxxxxxxxxxxx>
Sent: Thursday, December 27, 2007 11:29 PM
Subject: [gps-talkusers] Hollux 1000 receiver question


> Hi List,
> I want to connect my Hollux GPS receiver to my mPower BT32 and need to
> know which USB connection to use, and, where do I find an adapter so that
> I can connect the receiver to the USB cable.
>
> Thx,
> A.S.
> Albert Sanchez
> Al's Piano Tuning & Repair
> 215 John Avenue
> Greenville, NC 27858-4113
> 252-757-3023
>

Other related posts: