[gps-talkusers] Re: GPS RAM note
- From: Charles LaPierre <charles@xxxxxxxxxxxxxxxx>
- To: gps-talkusers@xxxxxxxxxxxxx
- Date: Sun, 29 Jul 2007 20:16:28 -0700
Hello Alex
GPS 4.0 takes the same amount of memory as it has always done. We
have always allocated 2 Megabytes of memory for the Richmap engine.
You are right, that when you do taskswitch out of GPS I don't free up
that memory (if I did it would be the same as exiting out and you
would loose your position, your route, the POIs you were looking at, etc.).
Thanks
Charles.
At 07:59 PM 7/29/2007, you wrote:
Hi all,
Just a quick note: GPS v4.0 takes around 2mb of RAM; 3.5 took much
less. Just keep this in mind when you are using your BN--you should
probably try closing the GPS program (exiting, not switching out as
that leaves it open) before resorting to a reset.
Have a great day,
Alex
Charles M. La Pierre CTO
Sendero Group, LLC
Lat. 37 15' 25" N Lon: 121 53' 04" W
- References:
- [gps-talkusers] GPS RAM note
- From: Alex Parks
Other related posts:
- » [gps-talkusers] GPS RAM note
- » [gps-talkusers] Re: GPS RAM note
- » [gps-talkusers] Re: GPS RAM note
Hi all,Just a quick note: GPS v4.0 takes around 2mb of RAM; 3.5 took much less. Just keep this in mind when you are using your BN--you should probably try closing the GPS program (exiting, not switching out as that leaves it open) before resorting to a reset.
Have a great day, Alex
- [gps-talkusers] GPS RAM note
- From: Alex Parks