[gps-talkusers] Re: EMPOWER CANNOT FIND BLUETOOTH RECEIVER

Hello Alex,
You are quite welcome.
I only found out about saying no to search for new devices friday evening at
CSUN and I found that I paired much faaster.
As for the reset I can't remember who told me but I found that from someone
and that has been a great feature.
Good luck with things.
Robert
----- Original Message -----
From: "Alex Parks" <mehgcap@xxxxxxx>
To: <gps-talkusers@xxxxxxxxxxxxx>
Sent: Monday, March 27, 2006 1:40 PM
Subject: [gps-talkusers] Re: EMPOWER CANNOT FIND BLUETOOTH RECEIVER


> Hi,
>
> Thanks.  I read in the Bluetooth document that a reset was
> needed, and never questioned it.  I just tried it with no reset,
> and it worked perfectly.  This will save hastle.
>
> Thanks again,
> Alex
>
> > ----- Original Message -----
> >From: "Robert Stigile" <rstigile@xxxxxxxxxxxxx
> >To: <gps-talkusers@xxxxxxxxxxxxx
> >Date: Mon, 27 Mar 2006 13:24:34 -0800
> >Subject: [gps-talkusers] Re: EMPOWER CANNOT FIND BLUETOOTH
> RECEIVER
>
> >Hello, if you have a mpower and you are using the blue logger,
> you do not
> >need to do a reset after pairing.
> >All you need to do is the following:
> >1.  turn on the blue logger reciever
> >2.  turn on the braillenote
> >3.  Go to options, then c for connectivity, then b for bluetooth
> >4.  if your braillenote says bluetooth is on then just press
> space bar if it
> >is not on press y for yes to turn it on
> >5.  It will ask you if you want to serach for devices say no
> >6.  if you need to pair it will then ask you to pair say yes
> >7.  it will then ask for authencity code enter 0000 and press
> enter
> >8.  once it says paired with bluetooth and activesync is active
> go back to
> >main menu
> >9.  Now press n for navigation and you will be brought into the
> gps menu and
> >you should be good to go.
> >regards,
> >Robert
> >----- Original Message -----
> >From: "Alex Parks" <mehgcap@xxxxxxx
> >To: <gps-talkusers@xxxxxxxxxxxxx
> >Sent: Monday, March 27, 2006 1:06 PM
> >Subject: [gps-talkusers] Re: EMPOWER CANNOT FIND BLUETOOTH
> RECEIVER
>
>
> >> Hi,
>
> >> I have a Blue Logger receiver and an mPower.  First, make sure
> >> you have:
> >> 1.  Turned on both the receiver and Bluetooth.
> >> 2.  Searched for, found, paired with, and activated ActiveSync
> >> (authentication code 0000) with the receiver.
> >> 3.  Done a reset after ActiveSync is active.
> >> 4.  Reactivated the receiver after the reset.
>
> >> If all that is done, and problems still persist, try exiting the
> >> GPS application and doing a simple reset, after turning off the
> >> receiver.  Repeat the steps above.  If nothing works, I don't
> >> know what to say.  Sometimes the printer service of the receiver
> >> keeps getting activated instead of the ActiveSync, so ensure
> that
> >> is not happening.
>
> >> Good luck, and sorry I couldn't help more.
> >> Alex
>
> >>> ----- Original Message -----
> >>>From: "kath lueders" <kageylucy@xxxxxxxxxxxxx
> >>>To: <gps-talkusers@xxxxxxxxxxxxx
> >>>Date: Mon, 27 Mar 2006 09:18:54 -0600
> >>>Subject: [gps-talkusers] EMPOWER CANNOT FIND BLUETOOTH RECEIVER
>
> >>> Hello Everyone,
>
> >>>I am trying to help my GPS Bluetooth receiver find my Empower.  I
> >>>probably ought to reverse that statement!  Anyway, Empower keeps
> >>>telling me to switch to virtual mode because the receiver is not
> >>>detected.
> >>>What am I doing wrong?
> >>>Thank you for your help.
>
> >>>Nina, Austin, and
> >>>Kathleen Goetsch Lueders
> >>>kageylucy@xxxxxxxxxxxxx
>
>
>
>
>
>
>
>
>
>
>

Other related posts: