[gps-talkusers] Re: Deactivation Problem
Thank you for the suggestions. I always answer no to search for devices. Does the 4-5-6 with the reset also erase my files? ----- Original Message ----- From: "Chris Grabowski" <chris@xxxxxxxxxxxxxxxx> 
To: <gps-talkusers@xxxxxxxxxxxxx>
Sent: Saturday, April 14, 2007 4:20 PM
Subject: [gps-talkusers] Re: Deactivation Problem



Hello Karen,
I have a question.  when you turn your bluetooth on, at the prompt
that says "search for devices?" do you search for devices or answer no
at that prompt.

I have seen the braillenote act strange if you search for devices
every time you turn on bluetooth.  try a reset and when the
braillenote says "search for devices" answer no and thenf ind the
holux in the list and re activate active sink.

You may need to do a 4-5-6 j-k-l reset and re pair your gps receiver
to get everything working good again.
Let me know if this helps.
Chris
On Sat, 14 Apr 2007 15:58:18 -0700, you wrote:


Hello all!
I'm having a strange problem. After I do a reset on the BrailleNote, I always know that I will have to go into the Bluetooth menu and activate active for the Holux receiver. However, now I have to activate it almost every time I turn on the BrailleNote. Even if I get out of the GPS and go to write something in another file, then I come back to the GPS, and the activesync for the Hollux will again need to be activated. Does anyone have any solutions to this? It's becoming a bit frustrating. 
With a smile,
Karen Shrawder

Other related posts: