[gps-talkusers] Re: BrailleNote GPS problem.

Make sure the receiver is set to blue tooth in the options menu.

-----Original Message-----
From: gps-talkusers-bounce@xxxxxxxxxxxxx
[mailto:gps-talkusers-bounce@xxxxxxxxxxxxx] On Behalf Of Sheila Killian
Sent: Friday, August 26, 2005 7:41 PM
To: gps-talkusers@xxxxxxxxxxxxx
Subject: [gps-talkusers] Re: BrailleNote GPS problem.


Hi to all,
I just got my GPs receiver for the PK yesterday. I charged up the Blue
Logger receiver yesterday evening and got it paired and set up with
Active Sync for Blue Tooth. While I was on the phone with Sendero tech
support, the blue logger turned on as expected and it started searching
for sattelites. However, when I went outside to actually try it out, I
invariably got the message Blue Tooth receiver not detected. Press V for
virtual. I checked the connectivity and they are paired, but no matter
what I did I couldn't get it to come on. 
What am I doing wrong?Any suggestions would be greatly appreciated!
Sheila
 

----- Original Message ----- 
From: Jim Noseworthy <mailto:jim.noseworthy@xxxxxxxxxx>  
To: gps-talkusers@xxxxxxxxxxxxx 
Sent: Wednesday, August 24, 2005 4:19 PM
Subject: [gps-talkusers] Re: BrailleNote GPS problem.

Hi:
 
Those settings were on.
 
Thanks.

----- Original Message ----- 
From: Sarai <mailto:bucc7465@xxxxxxxxxxxxx>  
To: gps-talkusers@xxxxxxxxxxxxx 
Sent: Wednesday, August 24, 2005 8:00 PM
Subject: [gps-talkusers] Re: BrailleNote GPS problem.

What about your look around mode settings? One of them is something like
display intersections and POI's. Make sure that's on.

-----Original Message-----
From: gps-talkusers-bounce@xxxxxxxxxxxxx
[mailto:gps-talkusers-bounce@xxxxxxxxxxxxx] On Behalf Of Jim Noseworthy
Sent: Wednesday, August 24, 2005 5:54 PM
To: gps-talkusers@xxxxxxxxxxxxx; Braillenote List
Subject: [gps-talkusers] BrailleNote GPS problem.


Hi Folks:
 
I was traveling with my wife for a drive of approximately 50 miles. I
wanted my BrailleNote GPS to automatically tell me the names of all of
the streets and points of interest as we passed them. I did not want to
create a rout since I was simply monitoring the progress of the drive.
If the car stopped an an intersection, the GPS system would give me
appropriate information.  As long as the car was moving, however, it was
necessary for me to constantly query the system for the information. I
checked and rechecked the look around option however, I was unable to
resolve my problem.
 
Am I doing something wrong or is what I am trying to do not possible.
 
By the way, my satellitereading was very good for the entire drive.
 
Thanks all over the place gang.

Other related posts: