[gps-talkusers] Re: BrailleNote GPS problem.

MessageHi Sheila, Try unpairing and pairing the receiver again.  You will need 
the pass code 0000.

Dave 

To read about the next Peace Seekers meeting click on the link below.

http://www.ThePeaceSeekers.org/program/


  ----- Original Message ----- 
  From: Sheila Killian 
  To: gps-talkusers@xxxxxxxxxxxxx 
  Sent: Friday, August 26, 2005 5:40 PM
  Subject: [gps-talkusers] Re: BrailleNote GPS problem.


  Hi to all,
  I just got my GPs receiver for the PK yesterday. I charged up the Blue Logger 
receiver yesterday evening and got it paired and set up with Active Sync for 
Blue Tooth. While I was on the phone with Sendero tech support, the blue logger 
turned on as expected and it started searching for sattelites. However, when I 
went outside to actually try it out, I invariably got the message Blue Tooth 
receiver not detected. Press V for virtual. I checked the connectivity and they 
are paired, but no matter what I did I couldn't get it to come on. 
  What am I doing wrong?Any suggestions would be greatly appreciated!
  Sheila

    ----- Original Message ----- 
    From: Jim Noseworthy 
    To: gps-talkusers@xxxxxxxxxxxxx 
    Sent: Wednesday, August 24, 2005 4:19 PM
    Subject: [gps-talkusers] Re: BrailleNote GPS problem.


    Hi:

    Those settings were on.

    Thanks.
      ----- Original Message ----- 
      From: Sarai 
      To: gps-talkusers@xxxxxxxxxxxxx 
      Sent: Wednesday, August 24, 2005 8:00 PM
      Subject: [gps-talkusers] Re: BrailleNote GPS problem.


      What about your look around mode settings? One of them is something like 
display intersections and POI's. Make sure that's on.
        -----Original Message-----
        From: gps-talkusers-bounce@xxxxxxxxxxxxx 
[mailto:gps-talkusers-bounce@xxxxxxxxxxxxx] On Behalf Of Jim Noseworthy
        Sent: Wednesday, August 24, 2005 5:54 PM
        To: gps-talkusers@xxxxxxxxxxxxx; Braillenote List
        Subject: [gps-talkusers] BrailleNote GPS problem.


        Hi Folks:

        I was traveling with my wife for a drive of approximately 50 miles. I 
wanted my BrailleNote GPS to automatically tell me the names of all of the 
streets and points of interest as we passed them. I did not want to create a 
rout since I was simply monitoring the progress of the drive.  If the car 
stopped an an intersection, the GPS system would give me appropriate 
information.  As long as the car was moving, however, it was necessary for me 
to constantly query the system for the information. I checked and rechecked the 
look around option however, I was unable to resolve my problem.

        Am I doing something wrong or is what I am trying to do not possible.

        By the way, my satellitereading was very good for the entire drive.

        Thanks all over the place gang.

Other related posts: