[gps-talkusers] Re: BrailleNote GPS Question.

Jim, 

The reason the GPS is continually recalculating even though it appears you are 
still on the route that it created is by design. There are two options for 
off-route recalculation, by default it is switched to automatic. If you want to 
change this option, then from the GPS menu, you will hit o for the GPS option, 
then space down until you get to off-route recalculation, hit enter, then you 
can either switch between manual or automatic, just press the initial letter 
for the option you so desire. Then once you are satisfied with your option you 
can either hit chord e on a BT keyboard or the escape key on a QT. You can 
access the GPS option when you are either at the GPS menu or even when you are 
in route following mode. It isn't required for you to be stationary to create a 
route, it can be done while you are moving or stationary. If you do find that 
you are veering off-route and wish to recalculate, you can hit backsace dot 3 
on a BT or the slash or backslash on a QT.  

Kevin 
----- Original Message ----- 
  From: Jim Noseworthy 
  To: gps-talkusers@xxxxxxxxxxxxx 
  Sent: Sunday, November 12, 2006 11:53 AM
  Subject: [gps-talkusers] BrailleNote GPS Question.


  Hi Folks:

  When creating a     vehicle rout, my BrailleNote GPS continually 
re-calculates the tout even though I am on a straight road.

  I should mention that I created the rout while the car was moving.  Would 
that be the cause of the problem?

  Thanks

Other related posts: