[goodfeel] Re: Incorrect amount of bar rests in 4/2 time signature

  • From: "BillList1" <billlist1@xxxxxxxxxxx>
  • To: <goodfeel@xxxxxxxxxxxxx>
  • Date: Sat, 07 Jan 2017 15:54:58 -0500

Hello, Ria, and happy new year to you.

I have spent some time researching your reported bugs.  Read on for suggested 
work-arounds.

O Magnum Mysterium

This piece has exposed a bug in GoodFeel that mishandles transcription of a 
whole-note rest that follows a whole measure rest in 4/2 time.  Until we can 
fix this problem, here is a work-around.

Move to the beginning of the bar that begins with the whole-note (semibreve) 
rest followed by the half (minim) rest.  In this case, bar 55.

Press CONTROL+N to enter note entry mode in Lime.

Type the number 1 until Lime is ready to accept a dotted whole/semibreve.

Type the letter r to enter a dotted whole/semibreve rest.

This solution works because the whole rest is followed by a half rest.  If the 
whole rest were followed by a note instead of a rest, you can change the whole 
rest to two half rests.

Launch GoodFeel and the braille music will now be transcribed correctly.  

You may want to change the braille to show that measure as beginning with dots 
1-3-4, dots 1-3-6 instead of dots 1-3-4, dot 3.  As you may know, you will want 
to use Notepad, Duxbury or other programs to revise GoodFeel's .gf files.  Our 
BrailleView has a habit of saving changes along with converting form feed 
characters into a line of text with the words "form feed."    

I don't see problems in the other two places you listed in your message.  Note 
that bar 99 has a note with a duration of a breve or double whole-note.  
GoodFeel transcribed it correctly showing a whole-note followed by dots 1-3.  
Not something you see every day.  

Bar 146 has 4 minims that total 4 beats in 4/2 time.  Bar 147 has a mix of 
minims and crotchets that add up to 4 beats. 

Brahms' Geistliche Lied

Just as in bar 55 of the piece above, move to downbeat of bar 8 and  combine 
the two rests into a single dotted semibreve.  Same for bar 22.

You could do the same at bar 41 but you would first have to move the dynamic 
mark of piano to the note following the minim rest.  Or you could change the 
semibreve rest to two minim rests.

I think the work-arounds noted above should apply to the remaining problem 
spots found in the Brahms.  Let me know if I have missed something.

To produce grade 1 German:

Close Lime and run GoodFeel

Choose Transcription Options from the Options menu.

Press SHIFT+TAB 7 times until you reach the browse button for literary file.

Press space bar.

Press SHIFT+TAB once or twice until you reach the Items View list.

Select Deutsch.ini from the list and press ENTER.

Press the TAB key twice to move to the Extended ASCII File browse button.

Press space bar to activate.

Press SHIFT+TAB once or twice until you reach the Items View list.

Select euro.ini from the list and press ENTER.
 
Press TAB key until you reach the Save as Defaults button and press space to 
save these settings.

Note that after you produce the song in German, you will probably want to 
change your setting for literary file back to NorthAmerican or UK, and your 
Extended ASCII setting back to "dot4".  Any time you change settings in the 
Transcription Options, remember to choose Save as Defaults to exit the dialog.  
Otherwise, settings will only apply until you close GoodFeel.  That is, the 
next time you run GoodFeel, it will revert to your former settings unless you 
choose that Save as Defaults button.

HTH,
Bill

---------- Forwarded message ----------
From: Ria Andriani <riani90@xxxxxxxxx>
Date: Wed, 4 Jan 2017 19:56:27 +1100
Subject: Incorrect amount of bar rests in 4/2 time signature
To: goodfeel <goodfeel@xxxxxxxxxxxxx>

Hello all,

Hope you had a restful Christmas and New year break. Also happy World Braille 
day.

I'm hoping someone can help me fix this problem: I am singing a couple of 
pieces in 4/2 time signature. The problem I have is when there are multiple bar 
rests (the same symbol as semibreve rests), Lime/Goodfeel puts incorrect amount 
of bar rests or beat rest. As you all know, spacing is crucial in this 
situation to put the Braille symbol in context.

I've attached XML and GF files for examples. In O Magnum Mysterium, the rests 
in Bars 55 and 56 should read: bar rest, semibreve rest, minim rest and fourth 
octave f minim. What I got in the convertion is two bars rest, then minim rest 
and fourth oc F minim. In the first instance, the beat counts is 9 beats 
altogether. In fact, there are only 7 beats of rest. The same thing occurs in 
bars 100 and 101 as well as 146 and 147.

The second piece I'm having trouble with is Brahms Geistliche Lied, soprano 
part. In this instance, there are multiple bars rest between the verses (just 
after the thin double barlines). In the first occasion, there are 3 consecutive 
semibreve rests followed by minim rest. In actual fact, there are 2 bars rest, 
then semibreve rest followed by a minim rest, dynamic marking and note. The 
next time it happens at the end of the second verse, the music reads 1 bar 
rests, 4 bars rest, minim rest, Dynamic piano marking and fourth oc G minim.
I've counted the rests on the recording of this piece and it adds up to 4 bars 
rest, semibreve rest, minim rest, dynamic piano marking and fourth oc G minim.

Is there any way I can fix this problem from Goodfeel transcription options? 
Also if someone could let me know how to change the output Braille lyrics in 
accented Grade 1 German Braille that would be much apreciated.

Thanks so much in advance.

Cheers,

Ria

--
Ria Andriani
Bachelor of music/Bachelor of arts
www.facebook.com/RiaAndrianiSoprano



-- 
Ria Andriani
Bachelor of music/Bachelor of arts
www.facebook.com/RiaAndrianiSoprano

** To leave the list, click on the immediately-following link:-
** [mailto:goodfeel-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** goodfeel-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:goodfeel-request@xxxxxxxxxxxxx?subject�q]
** or send a message, to
** goodfeel-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: