[goodfeel] Re: I am having some issues that I need help with please

  • From: "Duke" <douk.fattah@xxxxxxxxx>
  • To: <goodfeel@xxxxxxxxxxxxx>
  • Date: Tue, 25 Nov 2008 18:23:13 -0000

Thanks.
Douk
  ----- Original Message ----- 
  From: albertm13@xxxxxxxx 
  To: goodfeel@xxxxxxxxxxxxx 
  Sent: Monday, November 24, 2008 5:03 PM
  Subject: [goodfeel] Re: I am having some issues that I need help with please


  Hi,

  Check out David Goldstein's suggestions before starting over (especially the 
system restore point idea) and maybe Netmos can make some suggestions.  Anyway, 
please terminate your GOODFEEL license before using your restore disk if you 
end up using your restore disk.

  Thanks,
  Albert

  -- "Duke" <douk.fattah@xxxxxxxxx> wrote:
  Hi:
  I did in fact try the printer with my Braille lite and it worked. So the 
  cable and the printer are fine. Since we ran out of ideas, then I'll have to 
  reformat and recover original factory defaults. Is there anything special I 
  need to do with Goodfeel in order to keep the auth?
  Douk
  ----- Original Message ----- 
  From: <albertm13@xxxxxxxx>
  To: <goodfeel@xxxxxxxxxxxxx>
  Sent: Monday, November 24, 2008 3:40 AM
  Subject: [goodfeel] Re: I am having some issues that I need help with please


  Hi,

  Try the printer cable and the printer on another computer and see what 
  happens.

  Maybe someone could look at the computer for you.  It sounds like you tried 
  all the things that I wold recommend.

  Sorry, that I have no great ideas.

  Albert

  -- "Duke" <douk.fattah@xxxxxxxxx> wrote:
  Hi:
  The lime issue has been resolved. The embosser however still doesn't want to
  respond. I did the command you provided but it reported that such file
  didn't exist. I checked the device manager only to find that my parallel
  port had been switched to lpt3 for some reason I didn't understand. I even
  tried the command you provided with lpt 3, but it only sat there with no
  responce, and I had to do control alt delete to end its task. My computer is
  a sony vaio, and it came with only a parallel port and no serial ports. I
  had bought a PCI card with two serial ports on it (I couldn't find one with
  only one). I installed it to work with my braille display, and everything
  was working fine. I didn't check though whether the parallel port was named
  by the drivers of the new card being netmos although the card didn't  have
  aparallel port. Now that the problem emerged, I checked, and the port was
  named as netmos lpt3. I decided to uninstall the parallel port and reinstall
  it but to no avail. then I decided to remove the card altogether in order to
  see if the computer would pickup the original port. Unfortunately, the
  device manager didn't show any port at all. I ran the add hardware wizzard
  but it didn't automatically detect any hardware. So I had to add it manually
  as a standard parallel port, and it still selected lpt3. I changed it to
  lpt1, but it didn't work either way. I am tempted now to run the recovery
  wizzard that will put the computer back to its original state wich means
  that the hard disk will be reformatted. I am stomped. I will wait for any
  great ideas before I do that.
  Thanks
  Douk
  ----- Original Message ----- 
  From: <albertm13@xxxxxxxx>
  To: <goodfeel@xxxxxxxxxxxxx>
  Sent: Saturday, November 22, 2008 5:04 AM
  Subject: [goodfeel] Re: I am having some issues that I need help with please


  Hi,

  Whenever you run a different version of Lime than the one you ran previously
  Lime will give you that message.

  Lime also becomes unauthorized whenever you switch versions.

  If we didn't give you a password to authorize Lime then you should authorize
  Lime by starting GOODFEEL and opening and closing the Authorization dialog
  and then closing GOODFEEL.

  I never found any reason to think that XP SP2 causes problems with GOODFEEL.
  I really don't like all-in-one devices.  We had a Brother and it worked fine
  by itself but it slowed down the computer that we connected it to.  It also
  wasn't uninstalled completely by its uninstaller.  At the same time I'd be a
  little surprised if it bothered your Braille Blazer on LPT1 unless it also
  is connected to LPT1 in which case I'd be highly suspicious of it.  How is
  your Brother connected to your Computer?

  Test your Braille Blazer by opening a command prompt and typing:
  echo abc^l>lpt1
  and ^l means control+L (as in formfeed).

  Tell us how it goes.

  Albert

  >>> Douk wrote:
  Hi guys:

  I have sent the following message to the dancing dots support Address. I
  also wanted to post it here to see if anybody could pitch in with some great
  ideas. Please see below.


  Let me first tell you that I installed windows xp sp2 as an update
  successfully, then I installed a new Brother printer/scanner/fax 3 in one

  Issue one:

  I tried to run lime 8, and it gave me this error message:

  "Error

  Your existing LIME.INI file is not compatible with this version of Lime, and
  will be ignored.

  OK Cancel"

  When I click ok, it gives me the run as free or click here if you already
  paid. When I click on the "click here if you paid" it asks for a password.

  Issue two:

  I can't Braille my music via my Braille blazer using lpt1. I checked
  everything, and I couldn't pin down where the problem is? It used to work
  properly.

  Your help is much appreciated, and asap please

  Thanks

  Douk

  ____________________________________________________________
  Click here for proven Credit Repair programs. Increase your score today!
  
http://thirdpartyoffers.juno.com/TGL2131/fc/PnY6rbuoS2JjkSZ9TdtNNIFcOA5rlNjEG0yfdaZxGu0uYrekG1zhq/
  ** To leave the list, click on the immediately-following link:-
  ** [mailto:goodfeel-request@xxxxxxxxxxxxx?subject=subscribe]
  ** If this link doesn't work then send a message to:
  ** goodfeel-request@xxxxxxxxxxxxx
  ** and in the Subject line type
  ** unsubscribe
  ** For other list commands such as vacation mode, click on the
  ** immediately-following link:-
  ** [mailto:goodfeel-request@xxxxxxxxxxxxx?subjectúq]
  ** or send a message, to
  ** goodfeel-request@xxxxxxxxxxxxx with the Subject:- faq

  ** To leave the list, click on the immediately-following link:-
  ** [mailto:goodfeel-request@xxxxxxxxxxxxx?subject=unsubscribe]
  ** If this link doesn't work then send a message to:
  ** goodfeel-request@xxxxxxxxxxxxx
  ** and in the Subject line type
  ** unsubscribe
  ** For other list commands such as vacation mode, click on the
  ** immediately-following link:-
  ** [mailto:goodfeel-request@xxxxxxxxxxxxx?subject=faq]
  ** or send a message, to
  ** goodfeel-request@xxxxxxxxxxxxx with the Subject:- faq

  ____________________________________________________________
  Paying too much for your business phone system?  Click here to compare 
  systems from top companies.
  
http://thirdpartyoffers.juno.com/TGL2131/fc/PnY6rbwT014b3u408XEPnVFWYHjFzRgkyZtF1rC1QScSRm3b3M1H2/
  ** To leave the list, click on the immediately-following link:-
  ** [mailto:goodfeel-request@xxxxxxxxxxxxx?subject=subscribe]
  ** If this link doesn't work then send a message to:
  ** goodfeel-request@xxxxxxxxxxxxx
  ** and in the Subject line type
  ** unsubscribe
  ** For other list commands such as vacation mode, click on the
  ** immediately-following link:-
  ** [mailto:goodfeel-request@xxxxxxxxxxxxx?subjectúq]
  ** or send a message, to
  ** goodfeel-request@xxxxxxxxxxxxx with the Subject:- faq

  ** To leave the list, click on the immediately-following link:-
  ** [mailto:goodfeel-request@xxxxxxxxxxxxx?subject=unsubscribe]
  ** If this link doesn't work then send a message to:
  ** goodfeel-request@xxxxxxxxxxxxx
  ** and in the Subject line type
  ** unsubscribe
  ** For other list commands such as vacation mode, click on the
  ** immediately-following link:-
  ** [mailto:goodfeel-request@xxxxxxxxxxxxx?subject=faq]
  ** or send a message, to 
  ** goodfeel-request@xxxxxxxxxxxxx with the Subject:- faq



  ____________________________________________________________ 
  Shop now for huge discounts on quality surveillance cameras. Click here!

Other related posts: